Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280

Wood waste guides: what your waste means for briquetting

Most dry wood waste can be pressed into briquettes, but the type matters. Dust and shavings press directly, chippings need to be under about 15 mm, MDF has extra rules, and anything over about 15% moisture needs drying first.

Updated · By the IW Machines team, Newark

Which kind of waste do you have?

Waste Briquettes directly? Watch out for Guide
Sawdust Usually yes, if dry Moisture, especially from sawmills Sawdust
Planer and moulder shavings Yes Very light and bulky, so plan the hopper feed Wood shavings
Chippings If small enough Chip size (the Falach 50 lists 15 mm max) Wood chippings
MDF and board dust Several Falach models accept it Permits and rules on burning MDF and board dust
Hardwood and softwood Both Mixes press differently Hardwood vs softwood
Wet or green waste Not until dried Over about 15% moisture won’t bind Moisture content

Why does the type of waste matter?

A briquette press works by packing fine, dry material into a chamber under high pressure until the lignin in the wood binds it. Anything that gets in the way of that makes a weaker briquette. Water stops it binding. Large pieces don’t pack. Very light shavings can bridge in the hopper and starve the press. Board and treated timber press fine, but change what you’re allowed to do with the briquettes afterwards. Each guide below covers one of these in detail.

Who makes which waste?

Start by measuring your waste

Weigh what you produce in a typical week and note what it is. Note what you pay now to have it taken away. That tells you whether a press makes sense and what size you need. Our running costs calculator does the arithmetic.

What about offcuts?

A briquette press takes fine material. Offcuts, pallets and board strips need a shredder first. IWM supplies shredders through iwmachines.co.uk.

Not sure what yours will do? Send us a sample.

Questions

Common questions

What wood waste can be made into briquettes?

Dry sawdust, shavings, small chippings and, on several Falach models, MDF dust. Offcuts need shredding first, and wet waste needs drying.

Can mixed waste be briquetted?

Usually, if it is dry and fine enough. A mix of dust and shavings often presses well. Send a sample if you are unsure.

What waste can't go in a briquette press?

Large offcuts, wet or green waste over about 15% moisture, and anything with metal, stones or plastic in it. Keep general rubbish out of the extraction.

Do I need a shredder?

Only if you have offcuts or chips larger than the press accepts. Shavings and dust go straight in.

See what your own waste makes. Send a sample or watch a machine run in Newark.

Book a trial
Ask us

Tell us about your waste. We'll ring you back.

No hard sell. A straight conversation about the right size of machine for your waste, or whether you need one at all.

Quick enquiry

What waste do you have? (tap any)

We'll call during working hours. Your details are only used to answer your enquiry. Privacy

Thanks, we've got it.

We'll ring you back during working hours. Can't wait? Call 01636 918280.

Call Book a trial