Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280

Briquette machines for sawmills

A sawmill can briquette its sawdust, but only once it is dry. Green sawdust is usually far above the 15% moisture limit of a Falach press, so most mills need a drying stage first. For dry sawdust in volume, the Falach 70 (60–80 kg/hour) and Falach 100 (90–120 kg/hour) are the models to look at.

Updated · By the IW Machines team, Newark

Can sawmill sawdust be made into briquettes?

Yes, if it is dry enough. Here is the honest picture. Freshly felled timber is often well above 30% moisture, and its sawdust is just as wet. Falach presses list a maximum moisture content of 15%. Wet sawdust won’t bind. It comes out of the press soft or crumbles.

So the first question for any sawmill isn’t which press. It’s how dry your sawdust is.

Which sawmill waste is dry enough?

  • Waste from re-sawing or machining kiln-dried stock is usually dry enough to press directly.
  • Waste from a kiln-dried planing or moulding line on site is usually fine.
  • Green sawdust from the headrig or breakdown saws usually needs drying first.
  • Sawdust stored in open heaps picks up rain. Check it.

Many mills have both: wet sawdust from breaking down logs, and dry shavings and dust from processing kiln-dried timber. Separating the two streams means you can briquette the dry one now. Read our moisture content guide for how to measure it.

What output does a sawmill need?

Usually more than a workshop. Work it out the same way: weekly dry waste in kg, divided by the hours the press runs.

Model Output Power use Motor Supply Hopper Weight Price
Falach 50XL 40–60 kg/hour 3.8 kW 5.5 kW 3-phase, 16A 0.80 m³ 430 kg From £13,980 + VAT
Falach 70 60–80 kg/hour 4.9 kW 7.5 kW 3-phase, 32 amp 0.75 m³ 840 kg From £19,980 + VAT
Falach 100 90–120 kg/hour 8.2 kW 11 kW 3-phase, 32 amp 0.75 m³ 810 kg From £24,980 + VAT
Soukup 60–70 (used) 60–70 kg/hour Ask IWM 7.5 kW 3-phase, 32A Ask IWM 1270 kg From £12,500 + VAT

Example: 4,000 kg of dry waste a week, with the press running 40 hours, needs 100 kg per hour. That points to the Falach 100. Run it for longer each day and the Falach 70 may do. These are example figures. Use your own.

Falach 70 or Falach 100?

  • The Falach 70 is rated 60–80 kg/hour, uses 4.9 kW and makes 70 mm briquettes, 40–60 mm long. It is listed as “UK Clean Air Strategy compliant (virgin wood only)”, which suits a mill cutting clean timber.
  • The Falach 100 is rated 90–120 kg/hour, uses 8.2 kW and has an oil cooler for long runs. It lists 62 dB (max, under load).

Both need 3-phase 32 amp, share a 2220 × 1200 × 1510 mm frame and have a 0.75 m³ hopper. Both weigh over 800 kg, so check your floor.

What about a used press?

We sometimes have higher-output used machines, such as a reconditioned Falach 100 or the used Soukup 60–70. See used briquette machines.

What do sawmills do with briquettes?

Burn them on site for drying or heating, or bag them and keep them dry until you need them. Thinking of selling any? Check the fuel rules first. See our page for biomass and wood fuel producers. Pair the press with a Falach Five Bag Carousel (70 mm variant for the Falach 70 and 100) to bag as you go.

Is briquetting right for every mill?

Not always. If you already sell wet sawdust for bedding, board making or biomass at a fair price, that may suit you better than drying and pressing. If you pay to get rid of it, or have dry waste going to skips, briquetting is worth a look.

Check the rules before you burn them. Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? Send us a sample of your waste or come and see a machine running, or ask IWM on 01636 918280.

Machines that fit

Models to look at

Picked by rated output and briquette size. Tick Compare to see them side by side.

Questions

Common questions

Can I briquette green sawdust?

Not as it comes. Falach presses list a maximum moisture content of 15%. Green sawdust is usually far wetter and needs drying first.

What is the largest briquette machine you sell?

The Falach 100, rated 90–120 kg/hour, using 8.2 kW on 3-phase 32 amp.

Which Falach suits a sawmill cutting clean timber?

The Falach 70 (60–80 kg/hour) is listed as UK Clean Air Strategy compliant (virgin wood only). The Falach 100 suits higher volumes.

How heavy are the large presses?

The Falach 70 weighs 840 kg and the Falach 100 810 kg. The used Soukup 60–70 weighs 1270 kg.

Can I trial my sawdust?

Yes. Send a sample or come and see a machine running, and we'll confirm the details.

See what your own waste makes. Send a sample or watch a machine run in Newark.

Book a trial
Ask us

Tell us about your waste. We'll ring you back.

No hard sell. A straight conversation about the right size of machine for your waste, or whether you need one at all.

Quick enquiry

What waste do you have? (tap any)

We'll call during working hours. Your details are only used to answer your enquiry. Privacy

Thanks, we've got it.

We'll ring you back during working hours. Can't wait? Call 01636 918280.

Call Book a trial