Falach 20 Briquette Machine
- Output 10–25 kg/hr
- Briquette 30 × 30 × 30 mm cube
- Power use 1.1 kW
A briquette machine compresses dry wood shavings and dust into solid briquettes you can burn or sell. It cuts the volume of waste you store and pay to have removed.
17 machines · tick Compare on two or more to see them side by side
A reconditioned BrikStar C3-14 hydraulic briquette press, sold with a 6 month parts warranty. We don't…
A briquette machine, or briquette press, takes loose, dry wood waste such as shavings and dust. A hydraulic ram packs it into a chamber under high pressure, and the machine pushes out dense briquettes. No glue or binder is added. The pressure and the wood itself hold the briquette together.
Briquettes take up far less space than loose waste. You can burn them in a suitable stove, boiler or heater, or sell them.
A briquette machine suits workshops whose extraction system collects a steady flow of shavings and dust. It is worth looking at if you pay to have bags or skips of waste taken away, or if you could use the briquettes for heat.
Briquettes made from MDF, chipboard or treated timber are still waste wood. Before you burn or sell them, check with your local authority or environmental regulator. If you plan to sell fuel to households, check whether it needs certification, such as the Ready to Burn scheme in England.
We supply Falach hydraulic briquette presses, from the Falach 20 at 10–25 kg/hr up to the Falach 100 at 90–120 kg/hour. We also supply the BrikStar EK 20 for smaller shops. For bagging, we offer the Falach Five Bag Carousel Units and the IWM Six Bag Carousel Unit with Top Loading.
It depends on how much you make and what you pay to get rid of it now. Weigh your waste over a typical week and talk to us. We can suggest a press size, or tell you if one is not worth it yet.
Yes. Most presses only work well with dry waste. The Falach presses, for example, list a maximum moisture content of 15%. Wet or green waste usually needs drying first.
Many presses accept MDF dust, including the Falach range. Burning or selling MDF briquettes has its own rules, so check with your local authority or regulator first.
Most do. Some small models, such as the Falach 20, are also available in single-phase. Check the electrical details for each machine.
Usually, yes. Many presses are fed from an extractor, cyclone or silo. Some extractor units sit directly on the press hopper. Plan the layout before you buy.
Tell us what waste you have and roughly how much. We'll recommend the size that fits, new or used.
We'll ring you back during working hours. Can't wait? Call 01636 918280.