Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280
Falach 20XL Briquette Machine
Falach 10–25 kg/hour

Falach 20XL Briquette Machine

The Falach 20XL has the same 10–25 kg/hr output and 1250 × 740 mm footprint as the Falach 20, but stands 1450 mm tall with a 0.75 m³ hopper instead of 0.33 m³. It suits small workshops that load by hand and want to fill the hopper less often.

10–25 kg/hrPress Capacity
233 kgWeight
Price: From £8,980 + VAT. Delivery and installation can be arranged. Finance available.

At a glance

Machine
Hydraulic briquette press
Brand
Falach
Model
20XL
Condition
New
Output
10–25 kg/hour, about 80–200 kg in an 8-hour day
Price
From £8,980 + VAT
Supplied by
IW Machines, Newark · 01636 918280
Page updated
Is it right for you?

Who the 20XL is for

It's a good fit if…

  • Small workshops with light, bulky shavings that fill a hopper fast
  • Sites needing a single-phase option or with 3-phase 16A
  • Hand-loading from extraction bags, thanks to the 0.75 m³ hopper

Probably not yet if…

  • Low ceilings or restricted headroom: the Falach 20 is 1120 mm high
  • Waste regularly above 25 kg/hr: the Falach 50XL is rated 40–60 kg/hr

Not sure? Call us. We'll tell you honestly, even if the answer is a smaller machine, or a used one.

Specification

Falach 20XL Briquette Machine specification

Manufacturer's figures. Real output depends on your waste: its moisture, particle size and species. A trial with your own waste is the surest check.

Key figures
Noise Level68 dB at operator position
Full specification
Dimensions (L × W × H)1250 × 740 × 1450 mm
Weight233 kg
Briquette Size30 × 30 × 30 mm
Press Capacity10–25 kg/hr
Hopper Volume0.75 m³
Pump Motor Input2.2 kW
Power Consumption1.1 kW
Electrical Supply3-phase, 16A (single-phase option available)
OperationContinuous
Maximum Moisture Content15%
Specific Weight of Briquette900–1100 kg/m³
Oil CoolerNo
Briquette CollectionBriquette chute and single bag stand supplied as standard
Maximum Noise Level68 dB at operator position
Before you buy

Things to check against your work

Not sure? Send us a sample of your waste and we'll check it for you.

  • Your daily wasteRated at 10–25 kg an hour, so about 80–200 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
  • ElectricsNeeds 3-phase, 16A (single-phase option available). Check the supply where the press will stand, not just at the board.
  • How dry your waste isWorks up to 15% moisture. Kiln-dried offcuts are usually fine; green or outdoor-stored timber may not be.
  • Floor spaceThe machine measures 1250 × 740 × 1450 mm. Leave room around it to load the hopper and take bags away.
  • Noise68 dB at operator position while running.
See it for yourself

Watch it run, then try it with your waste

Send us at least 25 kg of your sawdust or shavings, or come and see a machine running in Newark. We’ll send the briquettes back so you can see what your waste makes. The trial is free, with no obligation.

Spread the cost

Finance on new and used machines. Ask and we'll put the monthly figure next to your price.

Backed by IW Machines

Servicing, parts and advice come from the same Newark team that sells it. Who we are

Your price

Four quick taps and we'll price the Falach 20XL Briquette Machine for you

Tell us about your waste and we'll come back with a price, and an honest view on whether this is the right size.

  • No obligation, no hard sell
  • Advice from the team that installs and services them
  • Finance figures if you want them

Rather talk? Call 01636 918280

Step 1 of 4

What waste do you have? (tick all)

Step 2 of 4

Roughly how much a day?

Step 3 of 4

When are you looking to buy?

Step 4 of 4

Where shall we send your price?

We'll ring you during working hours. Your details are only used to answer your enquiry.

Thanks, we're on it.

We'll ring you to go over your price for the Falach 20XL Briquette Machine. Can't wait? Call 01636 918280.

Questions buyers ask

Falach 20XL Briquette Machine FAQs

What is the difference between the Falach 20XL and Falach 20?

Same output (10–25 kg/hr), footprint (1250 × 740 mm), weight (233 kg) and power use (1.1 kW). The 20XL is 1450 mm tall against 1120 mm and has a 0.75 m³ hopper against 0.33 m³.

Is the Falach 20XL available in single-phase?

Yes. It is 3-phase 16A as standard, with a single-phase option using the same 2.2 kW motor.

What briquettes does the Falach 20XL make?

30 × 30 × 30 mm cubes, with a specific weight of 900–1100 kg/m³.

How are the briquettes collected?

A briquette chute and single bag stand are supplied as standard.

What is the maximum moisture content?

15%.

How much does the Falach 20XL Briquette Machine cost?

From £8,980 + VAT. The price is confirmed when you order, along with delivery, installation and any bagging unit. To see what it would save you, try the running costs calculator.

Can I try the Falach 20XL Briquette Machine with my own waste?

Yes. Book a briquetting trial: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.

Who installs and services it?

IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.

Can I spread the cost?

Yes. Finance can be arranged. Ask for monthly figures when you enquire, and set them against what you pay for waste collection now.

Similar machines

Models either side of this one

Tick Compare on any two or more to see them side by side.

BrikStar

BrikStar EK 20

  • Output 10–30 kg/hr
  • Power use 2.2 kW
From £11,500 + VAT
Call Book a trial