Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280
Falach 20 Briquette Machine
Falach 10–25 kg/hour

Falach 20 Briquette Machine

The Falach 20 is the smallest press in the Falach range, rated 10–25 kg/hr on a 1250 × 740 mm footprint. It uses 1.1 kW and comes in a single-phase version, so it suits small workshops with a modest, steady flow of dry shavings and dust.

10–25 kg/hrPress Capacity
30 × 30 × 30 mm cubeBriquette Size
68 dB at operator postNoise Level
Price: From £8,480 + VAT. Delivery and installation can be arranged. Finance available.

At a glance

Machine
Hydraulic briquette press
Brand
Falach
Model
20
Condition
New
Output
10–25 kg/hour, about 80–200 kg in an 8-hour day
Price
From £8,480 + VAT
Supplied by
IW Machines, Newark · 01636 918280
Page updated
Is it right for you?

Who the 20 is for

It's a good fit if…

  • Small workshops making roughly 400–1,000 kg of dry waste a week
  • Sites with only single-phase power (single-phase version available)
  • Tight spaces: 1250 × 740 mm footprint and 1120 mm high

Probably not yet if…

  • Waste regularly above 25 kg/hr: look at the Falach 30, 35 or 50XL
  • Waste above 15% moisture, which needs drying first

Not sure? Call us. We'll tell you honestly, even if the answer is a smaller machine, or a used one.

Specification

Falach 20 Briquette Machine specification

Manufacturer's figures. Real output depends on your waste: its moisture, particle size and species. A trial with your own waste is the surest check.

Key figures
Press Capacity10–25 kg/hr
Briquette Size30 × 30 × 30 mm cube
Noise Level68 dB at operator post
Full specification
Dimensions (L × W × H)1250 × 740 × 1120 mm
Weight233 kg
Hopper Volume0.33 m³
Pump Motor Input2.2 kW
Power Consumption1.1 kW
OperationContinuous
Maximum Moisture Content15%
Specific Weight of Briquettes900–1100 kg/m³
Oil CoolerNo
Maximum Noise Level68 dB at operator post
Electrical Supply3-phase, 16A (single-phase version available)
Before you buy

Things to check against your work

Not sure? Send us a sample of your waste and we'll check it for you.

  • Your daily wasteRated at 10–25 kg an hour, so about 80–200 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
  • ElectricsNeeds 3-phase, 16A (single-phase version available). Check the supply where the press will stand, not just at the board.
  • How dry your waste isWorks up to 15% moisture. Kiln-dried offcuts are usually fine; green or outdoor-stored timber may not be.
  • Floor spaceThe machine measures 1250 × 740 × 1120 mm. Leave room around it to load the hopper and take bags away.
  • Noise68 dB at operator post while running.
See it for yourself

Watch it run, then try it with your waste

Send us at least 25 kg of your sawdust or shavings, or come and see a machine running in Newark. We’ll send the briquettes back so you can see what your waste makes. The trial is free, with no obligation.

More videos: video 2

Spread the cost

Finance on new and used machines. Ask and we'll put the monthly figure next to your price.

Backed by IW Machines

Servicing, parts and advice come from the same Newark team that sells it. Who we are

Your price

Four quick taps and we'll price the Falach 20 Briquette Machine for you

Tell us about your waste and we'll come back with a price, and an honest view on whether this is the right size.

  • No obligation, no hard sell
  • Advice from the team that installs and services them
  • Finance figures if you want them

Rather talk? Call 01636 918280

Step 1 of 4

What waste do you have? (tick all)

Step 2 of 4

Roughly how much a day?

Step 3 of 4

When are you looking to buy?

Step 4 of 4

Where shall we send your price?

We'll ring you during working hours. Your details are only used to answer your enquiry.

Thanks, we're on it.

We'll ring you to go over your price for the Falach 20 Briquette Machine. Can't wait? Call 01636 918280.

Questions buyers ask

Falach 20 Briquette Machine FAQs

How much does the Falach 20 produce?

10–25 kg/hr of 30 × 30 × 30 mm cube briquettes, with a briquette specific weight of 900–1100 kg/m³.

Does the Falach 20 run on single-phase?

The standard machine needs 3-phase 16A. A single-phase version is available at the same capacity.

How big is the Falach 20?

1250 × 740 × 1120 mm (L × W × H), weighing 233 kg, with a 0.33 m³ hopper.

How much power does the Falach 20 use?

1.1 kW, from a 2.2 kW pump motor. At an example 25p per kWh that is about 28p an hour.

How loud is the Falach 20?

68 dB at the operator post, roughly the level of a normal conversation.

Can I try the Falach 20 Briquette Machine with my own waste?

Yes. Book a briquetting trial: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.

Who installs and services it?

IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.

Can I spread the cost?

Yes. Finance can be arranged. Ask for monthly figures when you enquire, and set them against what you pay for waste collection now.

Similar machines

Models either side of this one

Tick Compare on any two or more to see them side by side.

BrikStar

BrikStar EK 20

  • Output 10–30 kg/hr
  • Power use 2.2 kW
From £11,500 + VAT
Call Book a trial