Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280

Skip hire vs briquetting: which costs less for wood waste?

Skip hire costs nothing up front but you pay for every skip, forever. A briquette machine costs money up front, then mainly electricity: around 63–78 kWh per tonne on a Falach press, by our arithmetic from the published figures. Which costs less depends on how many skips you fill and what you pay for each.

Updated · By the IW Machines team, Newark

What does skip hire really cost for wood waste?

Skip prices vary by region, size and waste type, so use your own invoices. Then think about what’s in the skip. Loose dry shavings typically weigh around 60–120 kg per m³. An 8-yard skip holds about 6.1 m³, so it might carry only a few hundred kilos of shavings. You’re paying mostly to move air.

Worked example

These inputs are example figures. Replace them with your own.

Input Example figure
Skip size 8-yard (about 6.1 m³)
Skips per month 3
Cost per skip £280
Weight of waste 100 kg per m³
Electricity price 25p per kWh
Machine Falach 35: 2.2 kW, 30–40 kg/hour (we use 35 kg/hour)

Skip hire

  • 3 skips × £280 = £840 a month
  • £840 × 12 = £10,080 a year

Briquetting the same waste

  • Waste: 3 skips × 6.1 m³ × 100 kg = 1,830 kg a month
  • Press hours: 1,830 ÷ 35 = 52.3 hours a month
  • Electricity: 52.3 × 2.2 kW = 115.0 kWh
  • 115.0 kWh × £0.25 = £28.76 a month

The electricity is small next to the skips. But that isn’t the whole comparison.

What else goes on the briquetting side?

  • The machine. The Falach 35 is from £10,980 + VAT. Finance can be arranged.
  • Bags or boxes for the briquettes.
  • Servicing and wear parts. Ask IWM for the model you’re considering.
  • Operator time to load the hopper, if it isn’t fed from extraction, and to move bags.
  • Remaining skips. You’ll still have offcuts, packaging and general waste, though perhaps fewer skips.
  • Floor space: 1860 × 890 mm for the Falach 35, plus working room.
  • Rules on burning, especially if your waste includes MDF.

And on the other side, the briquettes. Dry wood briquettes typically hold around 4.5–5 kWh of energy per kg. Whether you burn them in a suitable heater or give them away, they’re no longer a cost to remove, and less waste goes to skips and landfill.

Side by side

Skip hire Briquetting
Upfront cost None Machine, from £8,480 + VAT new
Ongoing cost Every skip Electricity, bags, servicing
Space Skip on site, bags of loose waste Machine footprint, bagged briquettes
What you’re left with Nothing Fuel to use or give away
Waste type Anything Dry dust, shavings and small chips
Fire and dust Loose waste on site Less loose waste lying around

When does skip hire make more sense?

  • You only fill a skip every month or two
  • Your waste is mostly wet, large offcuts or mixed rubbish
  • You have no space or power supply for a press

When does briquetting make more sense?

  • Several skips or many bags a month of dry dust and shavings
  • You can use the briquettes for heat in a suitable heater
  • Space for skips or bags is tight

Which machine for your volume?

Model Output Power use Supply Price
Falach 20 10–25 kg/hr 1.1 kW 3-phase, 16A (single-phase version available) From £8,480 + VAT
Falach 35 30–40 kg/hour 2.2 kW 3-phase, 16A From £10,980 + VAT
Falach 50XL 40–60 kg/hour 3.8 kW 3-phase, 16A From £13,980 + VAT
Falach 70 60–80 kg/hour 4.9 kW 3-phase, 32 amp From £19,980 + VAT

Put your own figures into the running costs calculator, or send us a sample to see how your waste presses.

Check the rules before you burn them. Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? Send us a sample of your waste or come and see a machine running, or ask IWM on 01636 918280.

Machines that fit

Models to look at

Picked by rated output and briquette size. Tick Compare to see them side by side.

Questions

Common questions

How much does skip hire cost for wood waste?

It varies by region, skip size and waste type. Check your own invoices. The figures on this page are examples only.

How much wood waste fits in a skip?

By volume, an 8-yard skip holds about 6.1 m³. By weight, loose dry shavings typically weigh around 60–120 kg per m³, so a skip may hold only a few hundred kilos.

Does a briquette machine get rid of skips completely?

Rarely. You will usually still need some skips for offcuts, packaging and general waste, but often fewer.

What does it cost to run a briquette press per month?

Multiply press hours by the machine's power use and your electricity price. In our example, a Falach 35 pressing 1,830 kg a month uses about 115 kWh, or £28.76 at an example 25p per kWh.

How long until a briquette machine pays for itself?

It depends entirely on your figures. Add up the machine, bags, servicing and electricity, and compare with your skip costs. We won't give a payback figure without your numbers.

See what your own waste makes. Send a sample or watch a machine run in Newark.

Book a trial
Ask us

Tell us about your waste. We'll ring you back.

No hard sell. A straight conversation about the right size of machine for your waste, or whether you need one at all.

Quick enquiry

What waste do you have? (tap any)

We'll call during working hours. Your details are only used to answer your enquiry. Privacy

Thanks, we've got it.

We'll ring you back during working hours. Can't wait? Call 01636 918280.

Call Book a trial