Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280
Ex-demo
Ex Demo BrikStar EK Briquetting Machine
BrikStar 10–30 kg/hour

Ex Demo BrikStar EK Briquetting Machine

An ex-demo BrikStar EK briquette press. The model is rated 10–30 kg/hr, with a 2.2 kW motor on a 400 V three-phase supply, so it suits small workshops wanting a simple, low-power press at an ex-demo price.

10–30 kg/hrOutput
0.6 m³Hopper Capacity
~75 dBNoise Level
Price: on request. Ask and we'll give you a straight figure. Delivery and installation can be arranged. Finance available.

At a glance

Machine
Hydraulic briquette press
Model
EK
Condition
Ex-demo
Output
10–30 kg/hour, about 80–240 kg in an 8-hour day
Price
On request
Supplied by
IW Machines, Newark · 01636 918280
Page updated
Is it right for you?

Who the EK is for

It's a good fit if…

  • Small workshops with up to 25–30 kg/hr of dry waste
  • Single-switch operation that stops when the hopper is empty
  • Buyers who want an ex-demo machine rather than a used one

Probably not yet if…

  • Connection to a pressurised extraction system, or outdoor installation
  • Waste above 30 kg/hr: the Falach 30 or 35 suits that better

Not sure? Call us. We'll tell you honestly, even if the answer is a smaller machine, or a used one.

Specification

Ex Demo BrikStar EK Briquetting Machine specification

Manufacturer's figures. Real output depends on your waste: its moisture, particle size and species. A trial with your own waste is the surest check.

Key figures
Output10–30 kg/hr
Full specification
Output / Throughput~10–30 kg/hr (up to ~25 kg/hr quoted)
Motor Power2.2 kW (hydraulic pump); 2.4 kW installed input
Power Supply400 V, three-phase; electrical protection IP54
Briquette ShapeCylindrical, 62 mm diameter, 20–30 mm length
Briquette Density~900–1,100 kg/m³
Max Working Pressure~180 bar
Permissible Moisture ContentUp to ~15% by weight (optimal below 12%)
Hopper Capacity0.6 m³
Noise Level~75 dB
Operating TemperatureAmbient +5 to +35 °C; oil working temp up to ~60 °C
Machine Weight~385 kg
Suitable Input MaterialsSawdust, wood shavings, dry wood chips, carpentry waste
ManufacturerBRIKLIS, spol. s r.o.
Before you buy

Things to check against your work

Not sure? Send us a sample of your waste and we'll check it for you.

  • Your daily wasteRated at 10–30 kg an hour, so about 80–240 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
  • ElectricsNeeds 400 V, three-phase; electrical protection IP54. Check the supply where the press will stand, not just at the board.
  • How dry your waste isWorks up to Up to ~15% by weight (optimal below 12%) moisture. Kiln-dried offcuts are usually fine; green or outdoor-stored timber may not be.
  • What goes inSawdust, wood shavings, dry wood chips, carpentry waste. Burning briquettes made from MDF or treated timber has its own rules, so ask before you plan on it.
  • Noise~75 dB while running.
Ex Demo BrikStar EK Briquetting Machine
See it for yourself

Try it with your own waste first

Send us at least 25 kg of your sawdust or shavings, or come and see a machine running in Newark. We’ll send the briquettes back so you can see what your waste makes. The trial is free, with no obligation.

Spread the cost

Finance on new and used machines. Ask and we'll put the monthly figure next to your price.

Backed by IW Machines

Servicing, parts and advice come from the same Newark team that sells it. Who we are

Your price

Four quick taps and we'll price the Ex Demo BrikStar EK Briquetting Machine for you

Tell us about your waste and we'll come back with a price, and an honest view on whether this is the right size.

  • No obligation, no hard sell
  • Advice from the team that installs and services them
  • Finance figures if you want them

Rather talk? Call 01636 918280

Step 1 of 4

What waste do you have? (tick all)

Step 2 of 4

Roughly how much a day?

Step 3 of 4

When are you looking to buy?

Step 4 of 4

Where shall we send your price?

We'll ring you during working hours. Your details are only used to answer your enquiry.

Thanks, we're on it.

We'll ring you to go over your price for the Ex Demo BrikStar EK Briquetting Machine. Can't wait? Call 01636 918280.

Questions buyers ask

Ex Demo BrikStar EK Briquetting Machine FAQs

What output does the ex-demo BrikStar EK have?

The model is rated about 10–30 kg/hr, with up to about 25 kg/hr quoted. The specs listed are the standard model figures.

What power does it need?

400 V three-phase, with a 2.2 kW hydraulic pump motor and 2.4 kW installed input.

What briquettes does it make?

Cylinders 62 mm in diameter and 20–30 mm long.

Can it run unattended?

It is controlled with a single switch and stops automatically when the hopper is empty.

How much is it?

Ask IWM on 01636 918280 for the price and to check availability.

How much does the Ex Demo BrikStar EK Briquetting Machine cost?

IW Machines prices the Ex Demo BrikStar EK Briquetting Machine for your workshop, so the figure depends on the specification, tooling and options you need. Send an enquiry or call 01636 918280 for a quote. Finance can be arranged.

Can I try the Ex Demo BrikStar EK Briquetting Machine with my own waste?

Yes. Book a briquetting trial: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.

Who installs and services it?

IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.

Similar machines

Models either side of this one

Tick Compare on any two or more to see them side by side.

Call Book a trial