Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280
Machines

Briquette machines for wood waste

A briquette machine compresses dry wood shavings and dust into solid briquettes you can burn or sell. It cuts the volume of waste you store and pay to have removed.

4 machines · tick Compare on two or more to see them side by side

What is a briquette machine?

A briquette machine, or briquette press, takes loose, dry wood waste such as shavings and dust. A hydraulic ram packs it into a chamber under high pressure, and the machine pushes out dense briquettes. No glue or binder is added. The pressure and the wood itself hold the briquette together.

Briquettes take up far less space than loose waste. You can burn them in a suitable stove, boiler or heater, or sell them.

Who needs one

A briquette machine suits workshops whose extraction system collects a steady flow of shavings and dust. It is worth looking at if you pay to have bags or skips of waste taken away, or if you could use the briquettes for heat.

What to look for

  • Output. Presses are rated in kilograms per hour. Weigh how much waste you produce in a typical week and match the press to it.
  • Moisture content. Most presses need dry waste. Check the maximum moisture level each machine accepts.
  • Particle size. Large offcuts need to go through a shredder first.
  • Materials. Check the press can handle your mix, such as softwood, hardwood or MDF dust.
  • Continuous running. Some presses are built to run all day. Others suit shorter runs.
  • Feed and hopper. Plan how the waste gets from your extractor or silo into the press.
  • Power supply. Most presses need three-phase. A few small models have a single-phase option.
  • Bagging. A bagging carousel fills bags automatically, so you do not need to stand over the machine.

Using or selling briquettes

Briquettes made from MDF, chipboard or treated timber are still waste wood. Before you burn or sell them, check with your local authority or environmental regulator. If you plan to sell fuel to households, check whether it needs certification, such as the Ready to Burn scheme in England.

The machines we supply

We supply Falach hydraulic briquette presses, from the Falach 20 at 10–25 kg/hr up to the Falach 100 at 90–120 kg/hour. We also supply the BrikStar EK 20 for smaller shops. For bagging, we offer the Falach Five Bag Carousel Units and the IWM Six Bag Carousel Unit with Top Loading.

Questions buyers ask

Briquette machines: common questions

How much waste do I need to make a briquette machine worthwhile?

It depends on how much you make and what you pay to get rid of it now. Weigh your waste over a typical week and talk to us. We can suggest a press size, or tell you if one is not worth it yet.

Does my wood waste need to be dry?

Yes. Most presses only work well with dry waste. The Falach presses, for example, list a maximum moisture content of 15%. Wet or green waste usually needs drying first.

Can I briquette MDF dust?

Many presses accept MDF dust, including the Falach range. Burning or selling MDF briquettes has its own rules, so check with your local authority or regulator first.

Do briquette machines need three-phase power?

Most do. Some small models, such as the Falach 20, are also available in single-phase. Check the electrical details for each machine.

Can I connect a briquette machine to my dust extractor?

Usually, yes. Many presses are fed from an extractor, cyclone or silo. Some extractor units sit directly on the press hopper. Plan the layout before you buy.

Ask us

Not sure which machine you need?

Tell us what waste you have and roughly how much. We'll recommend the size that fits, new or used.

Quick enquiry

What waste do you have? (tap any)

We'll call during working hours. Your details are only used to answer your enquiry. Privacy

Thanks, we've got it.

We'll ring you back during working hours. Can't wait? Call 01636 918280.

Call Book a trial