Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280

Briquette machines for furniture makers

Furniture makers usually produce fine, dry dust and shavings from hardwood and board, which press well into briquettes. A Falach 30, 35 or 50 suits most furniture workshops. If your waste includes MDF or chipboard, check the rules before burning the briquettes.

Updated · By the IW Machines team, Newark

What waste does a furniture workshop make?

Sanding, routing and CNC work produce very fine dust. Planing and moulding produce shavings. Panel saws and edge banders add board dust. Most of it is dry, because both hardwood and board are kiln-dried or factory-made. That suits a briquette press well.

Which press suits a furniture maker?

Model Output Power use Supply Size (L × W × H) Price
Falach 20 10–25 kg/hr 1.1 kW 3-phase, 16A (single-phase version available) 1250 × 740 × 1120 mm From £8,480 + VAT
Falach 30 25–35 kg/hour 2.2 kW 3-phase, 16 amp 1860 × 890 × 1100 mm From £9,980 + VAT
Falach 35 30–40 kg/hour 2.2 kW 3-phase, 16A 1860 × 890 × 1100 mm From £10,980 + VAT
Falach 50 40–60 kg/hour 3.8 kW 3-phase, 16A 1860 × 890 × 1100 mm From £12,480 + VAT
Falach 50XL 40–60 kg/hour 3.8 kW 3-phase, 16A 1960 × 1150 × 1350 mm From £13,980 + VAT
  • A small cabinet or bespoke maker: Falach 20 or Falach 20XL, with single-phase versions available.
  • A steady production workshop: Falach 30 or Falach 35. The Falach 35 adds an agitator and automatic switch-out.
  • A furniture factory: Falach 50 or Falach 50XL, both 40–60 kg/hour on 3-phase 16A.

What about MDF, chipboard and veneered board?

The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials, so the press can handle it. The rules are the issue. Briquettes made from MDF, chipboard, laminate or lacquered material are not clean wood. Burning them may need an environmental permit or a registered exemption. Read our MDF and board dust guide.

If you work in both solid hardwood and board, consider separate extraction or bagging for the two. Clean hardwood briquettes give you more options.

A furniture maker who did it

First Grade Projects, a manufacturer of bespoke furniture and cubicle systems, used to send most of its raw material waste to skips and landfill. With support from Rhondda Cynon Taf County Borough Council through the Shared Prosperity Fund Business Growth Grant, it installed an industrial wood shredder and a briquette press. Waste is shredded, then pressed into briquettes used for heating. The company reports recycling over 90% of the raw material waste that previously went to skips, and the project supported a new job in the business.

Is fine dust a problem for a press?

Fine dust usually presses well. It packs tightly. The things to watch are moisture (Falach presses list 15% maximum), very light material bridging in the hopper (an agitator helps), and keeping dust under control around the press. Follow HSE guidance on wood dust.

What do furniture makers do with the briquettes?

  • Heat the workshop in a suitable stove or wood waste heater
  • Give them to staff and neighbours
  • Store them compactly and have them collected, if you can’t use them

Check the rules before you burn them. Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? Send us a sample of your waste or come and see a machine running, or ask IWM on 01636 918280.

Machines that fit

Models to look at

Picked by rated output and briquette size. Tick Compare to see them side by side.

Questions

Common questions

Can furniture workshop dust be briquetted?

Yes. Fine, dry dust and shavings press well. Falach presses list a maximum moisture content of 15%.

Can I briquette MDF and chipboard dust?

The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials. Burning board briquettes has its own rules, so check first.

Which press suits a small furniture maker?

The Falach 20 or 20XL, rated 10–25 kg/hr, with single-phase versions available.

Can I get help with funding?

Some businesses have had grant support. First Grade Projects had support through the Shared Prosperity Fund Business Growth Grant via its local council. Ask your council what is available. Finance can also be arranged through IWM.

See what your own waste makes. Send a sample or watch a machine run in Newark.

Book a trial
Ask us

Tell us about your waste. We'll ring you back.

No hard sell. A straight conversation about the right size of machine for your waste, or whether you need one at all.

Quick enquiry

What waste do you have? (tap any)

We'll call during working hours. Your details are only used to answer your enquiry. Privacy

Thanks, we've got it.

We'll ring you back during working hours. Can't wait? Call 01636 918280.

Call Book a trial