Falach 35 Briquette Machine
- Output 30–40 kg/hour
- Briquette 50 mm diameter
- Power use 2.2 kW
Small, dry wood chippings can be briquetted, usually mixed with dust and shavings. The Falach 50 lists a maximum chip size of 15 mm, so larger chips, offcuts and pallet wood need to go through a shredder first.
Yes, if they are small and dry. The Falach 30, 35, 50, 50XL and 100 list chippings among their accepted materials, and the BrikStar EK 20 accepts dry wood chips. What matters is size. The Falach 50 gives a maximum chip size of 15 mm, and IWM’s material guide for the BrikStar EK asks for pieces smaller than 15 mm. Use 15 mm as a working limit and check the model you’re looking at.
The press works by packing material into a small chamber. Large, hard pieces don’t pack tightly, can jam the feed and wear the press faster. Fine material fills the spaces and binds well. That is why a mix of chips, shavings and dust often presses better than chips on their own.
Offcuts, board strips, broken pallets and other solid pieces can’t go into a briquette press as they are. They need shredding first. A shredder turns them into chips small enough to feed the press. IWM supplies industrial shredders through iwmachines.co.uk, so we can look at the shredder and press together.
One of our customers, First Grade Projects, a maker of bespoke furniture and cubicle systems, did just this. With support from Rhondda Cynon Taf County Borough Council and the Shared Prosperity Fund Business Growth Grant, they installed an industrial wood shredder and a briquette press. Waste is shredded, then fed to the press, and the briquettes are used for heating. They report recycling over 90% of raw material waste that would previously have gone to skips.
| Model | Output | Power use | Supply | Hopper |
|---|---|---|---|---|
| Falach 35 | 30–40 kg/hour | 2.2 kW | 3-phase, 16A | 0.33 m³ |
| Falach 50 | 40–60 kg/hour | 3.8 kW | 3-phase, 16A | 0.33 m³ |
| Falach 50XL | 40–60 kg/hour | 3.8 kW | 3-phase, 16A | 0.80 m³ |
| Falach 70 | 60–80 kg/hour | 4.9 kW | 3-phase, 32 amp | 0.75 m³ |
| Falach 100 | 90–120 kg/hour | 8.2 kW | 3-phase, 32 amp | 0.75 m³ |
Check the rules before you burn them. Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.
Not sure which machine fits? Send us a sample of your waste or come and see a machine running, or ask IWM on 01636 918280.
Picked by rated output and briquette size. Tick Compare to see them side by side.
The Falach 50 lists 15 mm. IWM's guide for the BrikStar EK asks for pieces smaller than 15 mm. Check the model you choose.
Not directly. Shred them first into small chips, then press them, ideally mixed with dust and shavings.
Once shredded and dry, it can be pressed. Remove metal first, and remember pallet wood may not count as virgin wood for burning.
They press better mixed with finer dust and shavings, which fill the gaps. Send a sample to see how yours behave.
See what your own waste makes. Send a sample or watch a machine run in Newark.
No hard sell. A straight conversation about the right size of machine for your waste, or whether you need one at all.
We'll ring you back during working hours. Can't wait? Call 01636 918280.