Falach 30 Briquette Machine
The Falach 30 is rated 25–35 kg/hour, makes 50 mm briquettes and uses 2.2 kW on a 3-phase 16 amp supply. It suits workshops with a steady flow of waste, including MDF, that are happy to feed and supervise the press, since it has no agitator or automatic switch-out.
At a glance
- Machine
- Hydraulic briquette press
- Brand
- Falach
- Model
- 30
- Condition
- New
- Output
- 25–35 kg/hour, about 200–280 kg in an 8-hour day
- Price
- From £9,980 + VAT
- Try it first
- Send a sample of your waste, or see one running
- Supplied by
- IW Machines, Newark · 01636 918280
- Page updated
Who the 30 is for
It's a good fit if…
- Workshops making roughly 1,000–1,400 kg of waste over a 40-hour week
- Mixed waste including dust, shavings, chippings and MDF
- Buyers who want the lowest-cost 50 mm Falach and can supervise it
Probably not yet if…
- Unattended running: the Falach 35 adds an agitator and automatic switch-out
- Sites without 3-phase power: it is not a single-phase machine
Not sure? Call us. We'll tell you honestly, even if the answer is a smaller machine, or a used one.
Falach 30 Briquette Machine specification
Manufacturer's figures. Real output depends on your waste: its moisture, particle size and species. A trial with your own waste is the surest check.
| Output | 25–35 kg/hour |
|---|
| Capacity | 25–35 kg/hour |
|---|---|
| Briquette Diameter | 50 mm |
| Dimensions (L × W × H) | 1860 × 890 × 1100 mm |
| Weight | 400 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 4 kW |
| Power Consumption | 2.2 kW |
| Power Supply | 3-phase, 16 amp |
| Suitable Input Materials | All types of wood waste — shavings, dust, chippings including MDF |
| Operation | Continuous |
| Oil Cooler | No |
| Auto Reverse Vertical Agitator | No |
| Automatic Switch-out | No |
| Electrically Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Funnel-shaped Hopper | Yes |
| Noise Level | 68 dB |
| Warranty | 12 months |
Things to check against your work
Not sure? Send us a sample of your waste and we'll check it for you.
- Your daily wasteRated at 25–35 kg an hour, so about 200–280 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
- ElectricsNeeds 3-phase, 16 amp. Check the supply where the press will stand, not just at the board.
- What goes inAll types of wood waste — shavings, dust, chippings including MDF. Burning briquettes made from MDF or treated timber has its own rules, so ask before you plan on it.
- Floor spaceThe machine measures 1860 × 890 × 1100 mm. Leave room around it to load the hopper and take bags away.
- Noise68 dB while running.
Watch it run, then try it with your waste
Send us at least 25 kg of your sawdust or shavings, or come and see a machine running in Newark. We’ll send the briquettes back so you can see what your waste makes. The trial is free, with no obligation.
Spread the cost
Finance on new and used machines. Ask and we'll put the monthly figure next to your price.
Backed by IW Machines
Servicing, parts and advice come from the same Newark team that sells it. Who we are
Four quick taps and we'll price the Falach 30 Briquette Machine for you
Tell us about your waste and we'll come back with a price, and an honest view on whether this is the right size.
- No obligation, no hard sell
- Advice from the team that installs and services them
- Finance figures if you want them
Rather talk? Call 01636 918280
Thanks, we're on it.
We'll ring you to go over your price for the Falach 30 Briquette Machine. Can't wait? Call 01636 918280.
Falach 30 Briquette Machine FAQs
What output does the Falach 30 have?
25–35 kg/hour of 50 mm diameter briquettes.
Can the Falach 30 press MDF?
Yes. It lists all types of wood waste, including shavings, dust, chippings and MDF. Check the rules before burning MDF briquettes.
What power does the Falach 30 need?
3-phase, 16 amp. It has a 4 kW pump motor and uses 2.2 kW. It is not a single-phase machine.
What warranty does the Falach 30 have?
12 months.
How big is the Falach 30?
1860 × 890 × 1100 mm (L × W × H) and 400 kg, with a 0.33 m³ funnel-shaped hopper.
How much does the Falach 30 Briquette Machine cost?
From £9,980 + VAT. The price is confirmed when you order, along with delivery, installation and any bagging unit. To see what it would save you, try the running costs calculator.
Can I try the Falach 30 Briquette Machine with my own waste?
Yes. Book a briquetting trial: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.
Who installs and services it?
IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.
Can I spread the cost?
Yes. Finance can be arranged. Ask for monthly figures when you enquire, and set them against what you pay for waste collection now.
Models either side of this one
Tick Compare on any two or more to see them side by side.
Falach 35 Briquette Machine
- Output 30–40 kg/hour
- Briquette 50 mm diameter
- Power use 2.2 kW
Falach 20 Briquette Machine
- Output 10–25 kg/hr
- Briquette 30 × 30 × 30 mm cube
- Power use 1.1 kW
Falach 20XL Briquette Machine
- Output 10–25 kg/hr
- Briquette 30 × 30 × 30 mm
- Power use 1.1 kW