Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280

Briquette machines for shopfitters

A shopfitting workshop makes mostly board dust: MDF, chipboard, plywood and laminate. A Falach 30, 35 or 50XL can press it into compact briquettes, which cuts the volume you store and have collected. Because board isn't clean wood, check the rules before you burn the briquettes.

Updated · By the IW Machines team, Newark

What waste does a shopfitter make?

Panel saws, CNC routers and edge banders cutting MDF, chipboard, plywood, laminate and veneered board. The waste is dry and fine, often with a lot of very light dust. It fills bags fast and is a nuisance to handle loose.

Can a briquette machine handle board dust?

Yes. These Falach models list MDF among their accepted materials:

Model Output Power use Supply Size (L × W × H) Price
Falach 30 25–35 kg/hour 2.2 kW 3-phase, 16 amp 1860 × 890 × 1100 mm From £9,980 + VAT
Falach 35 30–40 kg/hour 2.2 kW 3-phase, 16A 1860 × 890 × 1100 mm From £10,980 + VAT
Falach 50 40–60 kg/hour 3.8 kW 3-phase, 16A 1860 × 890 × 1100 mm From £12,480 + VAT
Falach 50XL 40–60 kg/hour 3.8 kW 3-phase, 16A 1960 × 1150 × 1350 mm From £13,980 + VAT
Falach 100 90–120 kg/hour 8.2 kW 3-phase, 32 amp 2220 × 1200 × 1510 mm From £24,980 + VAT

The Falach 70 is described for virgin wood, so it is not the one to pick for a mainly board waste stream.

What are the rules for board briquettes?

This is the part to get right. MDF, chipboard and laminate contain resins and surface materials, so they are not clean wood. In the UK, burning waste wood of this kind may need an environmental permit or a registered exemption, and selling it as fuel brings more rules. We can’t tell you what applies to your site. Ask the Environment Agency (or SEPA, NRW or NIEA) and your local authority.

Many shopfitters briquette board waste mainly to reduce its volume, then have the briquettes collected. A dense briquette takes far less room than loose dust.

Which press suits a shopfitter?

  • A small shopfitting workshop: Falach 30, 25–35 kg/hour on 3-phase 16 amp. It has no agitator or automatic switch-out, so expect to supervise it.
  • A busier shop with a CNC running most of the day: Falach 35 (30–40 kg/hour) with an agitator and automatic switch-out.
  • A large shopfitting factory: Falach 50XL, 40–60 kg/hour, with a 0.80 m³ hopper and a vibration unit for light dust.

Shredding offcuts

Shopfitters also make board offcuts. These need a shredder before the press. First Grade Projects, a maker of bespoke furniture and cubicle systems, shreds its waste and then feeds it into a briquette press, and reports recycling over 90% of the raw material waste that previously went to skips. IWM supplies shredders through iwmachines.co.uk.

Is it worth it if I can’t burn the briquettes?

Possibly. Work out what you pay to move loose dust now, and compare it with the electricity to press it and the cost of having briquettes collected. Our running costs page shows the method with example figures.

Check the rules before you burn them. Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? Send us a sample of your waste or come and see a machine running, or ask IWM on 01636 918280.

Machines that fit

Models to look at

Picked by rated output and briquette size. Tick Compare to see them side by side.

Questions

Common questions

Can shopfitting board dust be briquetted?

Yes. The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials.

Can I burn MDF and chipboard briquettes?

Possibly not without a permit or exemption. Check with your environmental regulator and local authority first.

Why briquette board dust if I can't burn it?

To cut the volume. Briquettes are far more compact than loose dust, so they are easier to store and have collected.

Which press suits a shopfitter with a CNC router?

Often the Falach 35 (30–40 kg/hour) or the Falach 50XL (40–60 kg/hour), depending on your weekly volume.

See what your own waste makes. Send a sample or watch a machine run in Newark.

Book a trial
Ask us

Tell us about your waste. We'll ring you back.

No hard sell. A straight conversation about the right size of machine for your waste, or whether you need one at all.

Quick enquiry

What waste do you have? (tap any)

We'll call during working hours. Your details are only used to answer your enquiry. Privacy

Thanks, we've got it.

We'll ring you back during working hours. Can't wait? Call 01636 918280.

Call Book a trial