Part of IW Machines · Newark, Nottinghamshire · Part of IW Machines: iwmachines.co.uk → Mon–Fri 8am–5pm · 01636 918280
BrikStar EK 20
BrikStar 10–30 kg/hour

BrikStar EK 20

The BrikStar EK 20 is a compact hydraulic press rated 10–30 kg/hr, with a 2.2 kW pump motor on a 400 V three-phase supply. It runs from a single switch and stops itself when the hopper is empty, so it suits small joinery and carpentry shops new to briquetting.

10–30 kg/hrOutput
0.6 m³Hopper Capacity
~75 dBNoise Level
Price: From £11,500 + VAT. Delivery and installation can be arranged. Finance available.

At a glance

Machine
Hydraulic briquette press
Model
EK 20
Condition
New
Output
10–30 kg/hour, about 80–240 kg in an 8-hour day
Price
From £11,500 + VAT
Supplied by
IW Machines, Newark · 01636 918280
Page updated
Is it right for you?

Who the EK 20 is for

It's a good fit if…

  • Small shops with modest waste volumes up to 25–30 kg/hr
  • Simple, single-switch operation that stops when the hopper is empty
  • Dry sawdust, shavings, dry chips and carpentry waste

Probably not yet if…

  • Connection to a pressurised extraction system, or installing outdoors
  • Waste regularly above 30 kg/hr: the Falach 30 or 35 suits that better

Not sure? Call us. We'll tell you honestly, even if the answer is a smaller machine, or a used one.

Specification

BrikStar EK 20 specification

Manufacturer's figures. Real output depends on your waste: its moisture, particle size and species. A trial with your own waste is the surest check.

Key figures
Output10–30 kg/hr
Full specification
Output / Throughput~10–30 kg/hr (up to ~25 kg/hr quoted)
Motor Power2.2 kW (hydraulic pump); 2.4 kW installed input
Power Supply400 V, three-phase; electrical protection IP54
Briquette ShapeCylindrical, 62 mm diameter, 20–30 mm length
Briquette Density~900–1,100 kg/m³
Max Working Pressure~180 bar
Permissible Moisture ContentUp to ~15% by weight (optimal below 12%)
Hopper Capacity0.6 m³
Noise Level~75 dB
Operating TemperatureAmbient +5 to +35 °C; oil working temp up to ~60 °C
Machine Weight~385 kg
Suitable Input MaterialsSawdust, wood shavings, dry wood chips, carpentry waste
ManufacturerBRIKLIS, spol. s r.o.
Before you buy

Things to check against your work

Not sure? Send us a sample of your waste and we'll check it for you.

  • Your daily wasteRated at 10–30 kg an hour, so about 80–240 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
  • ElectricsNeeds 400 V, three-phase; electrical protection IP54. Check the supply where the press will stand, not just at the board.
  • How dry your waste isWorks up to Up to ~15% by weight (optimal below 12%) moisture. Kiln-dried offcuts are usually fine; green or outdoor-stored timber may not be.
  • What goes inSawdust, wood shavings, dry wood chips, carpentry waste. Burning briquettes made from MDF or treated timber has its own rules, so ask before you plan on it.
  • Noise~75 dB while running.
See it for yourself

Watch it run, then try it with your waste

Send us at least 25 kg of your sawdust or shavings, or come and see a machine running in Newark. We’ll send the briquettes back so you can see what your waste makes. The trial is free, with no obligation.

More videos: video 2

Spread the cost

Finance on new and used machines. Ask and we'll put the monthly figure next to your price.

Backed by IW Machines

Servicing, parts and advice come from the same Newark team that sells it. Who we are

Your price

Four quick taps and we'll price the BrikStar EK 20 for you

Tell us about your waste and we'll come back with a price, and an honest view on whether this is the right size.

  • No obligation, no hard sell
  • Advice from the team that installs and services them
  • Finance figures if you want them

Rather talk? Call 01636 918280

Step 1 of 4

What waste do you have? (tick all)

Step 2 of 4

Roughly how much a day?

Step 3 of 4

When are you looking to buy?

Step 4 of 4

Where shall we send your price?

We'll ring you during working hours. Your details are only used to answer your enquiry.

Thanks, we're on it.

We'll ring you to go over your price for the BrikStar EK 20. Can't wait? Call 01636 918280.

Questions buyers ask

BrikStar EK 20 FAQs

What output does the BrikStar EK 20 have?

About 10–30 kg/hr, with up to about 25 kg/hr quoted.

What briquettes does it make?

Cylindrical briquettes, 62 mm in diameter and 20–30 mm long, with a density of about 900–1,100 kg/m³.

What power does the BrikStar EK 20 need?

400 V three-phase, with IP54 electrical protection. It has a 2.2 kW hydraulic pump motor and 2.4 kW installed input.

How dry does the waste need to be?

Up to about 15% moisture by weight, best below 12%.

How loud is it?

About 75 dB. Hearing protection is advisable for long periods close by.

Can I try the BrikStar EK 20 with my own waste?

Yes. Book a briquetting trial: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.

Who installs and services it?

IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.

Can I spread the cost?

Yes. Finance can be arranged. Ask for monthly figures when you enquire, and set them against what you pay for waste collection now.

Similar machines

Models either side of this one

Tick Compare on any two or more to see them side by side.

Call Book a trial