# Wood chippings briquettes

> Small, dry wood chippings can be briquetted, usually mixed with dust and shavings. The Falach 50 lists a maximum chip size of 15 mm, so larger chips, offcuts and pallet wood need to go through a shredder first.

- URL: https://briquette-machines.co.uk/waste/wood-chippings/
- Updated: 18 November 2026

## Can wood chips go in a briquette press?

Yes, if they are small and dry. The Falach 30, 35, 50, 50XL and 100 list chippings among their accepted materials, and the BrikStar EK 20 accepts dry wood chips. What matters is size. The Falach 50 gives a maximum chip size of 15 mm, and IWM’s material guide for the BrikStar EK asks for pieces smaller than 15 mm. Use 15 mm as a working limit and check the model you’re looking at.

## Why does chip size matter?

The press works by packing material into a small chamber. Large, hard pieces don’t pack tightly, can jam the feed and wear the press faster. Fine material fills the spaces and binds well. That is why a mix of chips, shavings and dust often presses better than chips on their own.

## What about offcuts and pallets?

Offcuts, board strips, broken pallets and other solid pieces can’t go into a briquette press as they are. They need shredding first. A shredder turns them into chips small enough to feed the press. IWM supplies industrial shredders through [iwmachines.co.uk](https://www.iwmachines.co.uk/), so we can look at the shredder and press together.

One of our customers, First Grade Projects, a maker of bespoke furniture and cubicle systems, did just this. With support from Rhondda Cynon Taf County Borough Council and the Shared Prosperity Fund Business Growth Grant, they installed an industrial wood shredder and a briquette press. Waste is shredded, then fed to the press, and the briquettes are used for heating. They report recycling over 90% of raw material waste that would previously have gone to skips.

## Shredder plus press: what to check

- **Output match.** The shredder and press should handle similar kilos per hour, or you’ll need a buffer store between them.

- **Metal.** Nails, staples and screws in pallets and site waste can damage a shredder and press. Plan how you’ll keep metal out.

- **Board and treated timber.** Pallets, painted wood and board are not virgin wood. That affects what you can do with the briquettes. See the rules below.

- **Moisture.** Pallet wood and outdoor offcuts are often not dry. Check before pressing.

## Which press for chippings?

Model |
Output |
Power use |
Supply |
Hopper |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
0.33 m³ |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
0.33 m³ |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
0.80 m³ |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
3-phase, 32 amp |
0.75 m³ |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
0.75 m³ |

- For mixed workshop waste with some chips: [Falach 35](/machines/falach-35-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/).

- For a shredder line producing a lot of chip: [Falach 70](/machines/falach-70-briquette-machine/) or [Falach 100](/machines/falach-100-briquette-machine/), both with 0.75 m³ hoppers.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

## Models that fit

- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

## Questions and answers

**What is the maximum chip size for a briquette press?**
The Falach 50 lists 15 mm. IWM's guide for the BrikStar EK asks for pieces smaller than 15 mm. Check the model you choose.

**Can I briquette offcuts?**
Not directly. Shred them first into small chips, then press them, ideally mixed with dust and shavings.

**Can I briquette pallet wood?**
Once shredded and dry, it can be pressed. Remove metal first, and remember pallet wood may not count as virgin wood for burning.

**Do chips make good briquettes on their own?**
They press better mixed with finer dust and shavings, which fill the gaps. Send a sample to see how yours behave.

## Who runs this site

- Briquette Machines (https://briquette-machines.co.uk/) is run by International Woodworking Machinery Ltd, trading as IW Machines (IWM). Main website: https://www.iwmachines.co.uk/
- What they do: supply, install and service briquette presses that turn wood waste (sawdust, shavings, chippings) into solid briquettes, for joinery workshops, sawmills, pallet makers, timber merchants, furniture makers, shopfitters and wood fuel producers across the UK. Brands: Falach (main range) and BrikStar. Also used and ex-demo briquetters.
- Address: Unit 20, Newark Business Park, 3 Brunel Drive, Newark, Nottinghamshire NG24 2EG, United Kingdom
- Phone: 01636 918280
- Email: info@iwmachines.co.uk
- Opening hours: Mon–Fri 8am–5pm; weekends by appointment
- Also in Newark: Unit 29, service and refurbishment workshop (the showroom and demonstration area is Unit 20)
- IWM founded: April 2009 by Ian Brown, who has worked in the woodworking machinery trade since 1973, when he started as an apprentice at Wadkin
- Companies House number: 06872243
- VAT number: 971462605
- Try before you buy: briquetting trials with the buyer's own waste: https://briquette-machines.co.uk/book-a-trial/
- Enquiries: https://briquette-machines.co.uk/contact/
