# Falach 50 Briquette Machine

> The Falach 50 is rated 40–60 kg/hour on a 3-phase 16A supply, using 3.8 kW, and runs continuously with an oil cooler, agitator and automatic switch-out. At 1100 mm high it suits busy joinery and timber workshops with lower headroom.

- Type: Hydraulic briquette press for wood waste
- Output: 40–60 kg of waste per hour (manufacturer figure), about 320–480 kg in an 8-hour day
- Power consumption: 3.8 kW while running
- Brand: Falach
- Model: 50
- Condition: New
- Price: From £12,480 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-50-briquette-machine/
- Last updated: 18 November 2026

## Key numbers

- 40–60 kg/hour Production Rate
- 50mm Briquette Diameter
- 68 dB Noise Level

## Specification

| Spec | Value |
|---|---|
| Production Rate | 40–60 kg/hour |
| Briquette Diameter | 50mm |
| Briquette Density | 700–900 kg/m³ |
| Material Compatibility | All wood waste — shavings, dust, chippings, MDF; max moisture 15%; max chip size 15mm |
| Dimensions (L × W × H) | 1860 × 890 × 1100 mm |
| Weight | 390 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 5.5 kW |
| Power Consumption | 3.8 kW |
| Power Supply | 3-phase, 16A |
| Operation | Continuous |
| Oil Cooler | Yes |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Electrically Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Noise Level | 68 dB |
| Certification | UKCA; Clean Air Strategy compliant |

## Check before you buy

- **Your daily waste**: Rated at 40–60 kg an hour, so about 320–480 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
- **Electrics**: Needs 3-phase, 16A. Check the supply where the press will stand, not just at the board.
- **What goes in**: All wood waste — shavings, dust, chippings, MDF; max moisture 15%; max chip size 15mm. Burning briquettes made from MDF or treated timber has its own rules, so ask before you plan on it.
- **Floor space**: The machine measures 1860 × 890 × 1100 mm. Leave room around it to load the hopper and take bags away.
- **Noise**: 68 dB while running.

## Questions and answers

**What output does the Falach 50 have?**
40–60 kg/hour of 50 mm briquettes.

**What can the Falach 50 press?**
All wood waste: shavings, dust, chippings and MDF, with a maximum moisture of 15% and a maximum chip size of 15 mm.

**What power does the Falach 50 need?**
3-phase, 16A. It has a 5.5 kW pump motor and uses 3.8 kW.

**What is the difference between the Falach 50 and 50XL?**
Same output and power. The 50XL has a 0.80 m³ hopper against 0.33 m³, a vibration unit and a larger footprint (1960 × 1150 mm against 1860 × 890 mm).

**What certification does the Falach 50 have?**
It is listed as UKCA and Clean Air Strategy compliant. What you may burn still depends on your waste, so check the rules for board or treated timber.

**How much does the Falach 50 Briquette Machine cost?**
From £12,480 + VAT. The price is confirmed when you order, along with delivery, installation and any bagging unit. To see what it would save you, try the running costs calculator at https://briquette-machines.co.uk/running-costs/.

**Can I try the Falach 50 Briquette Machine with my own waste?**
Yes. Book a briquetting trial at https://briquette-machines.co.uk/book-a-trial/: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.

**Who installs and services it?**
IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.

**Can I spread the cost?**
Yes. Finance can be arranged. Ask for monthly figures when you enquire, and set them against what you pay for waste collection now.

## How to buy or try it

Call IW Machines on 01636 918280 (Mon–Fri 8am–5pm), email info@iwmachines.co.uk, or send an enquiry at https://briquette-machines.co.uk/machines/falach-50-briquette-machine/#enquire. To test your own waste first, book a briquetting trial at https://briquette-machines.co.uk/book-a-trial/. Compare models at https://briquette-machines.co.uk/compare/ and estimate running costs at https://briquette-machines.co.uk/running-costs/.

## Who runs this site

- Briquette Machines (https://briquette-machines.co.uk/) is run by International Woodworking Machinery Ltd, trading as IW Machines (IWM). Main website: https://www.iwmachines.co.uk/
- What they do: supply, install and service briquette presses that turn wood waste (sawdust, shavings, chippings) into solid briquettes, for joinery workshops, sawmills, pallet makers, timber merchants, furniture makers, shopfitters and wood fuel producers across the UK. Brands: Falach (main range) and BrikStar. Also used and ex-demo briquetters.
- Address: Unit 20, Newark Business Park, 3 Brunel Drive, Newark, Nottinghamshire NG24 2EG, United Kingdom
- Phone: 01636 918280
- Email: info@iwmachines.co.uk
- Opening hours: Mon–Fri 8am–5pm; weekends by appointment
- Also in Newark: Unit 29, service and refurbishment workshop (the showroom and demonstration area is Unit 20)
- IWM founded: April 2009 by Ian Brown, who has worked in the woodworking machinery trade since 1973, when he started as an apprentice at Wadkin
- Companies House number: 06872243
- VAT number: 971462605
- Try before you buy: briquetting trials with the buyer's own waste: https://briquette-machines.co.uk/book-a-trial/
- Enquiries: https://briquette-machines.co.uk/contact/
