# Falach 20 Briquette Machine

> The Falach 20 is the smallest press in the Falach range, rated 10–25 kg/hr on a 1250 × 740 mm footprint. It uses 1.1 kW and comes in a single-phase version, so it suits small workshops with a modest, steady flow of dry shavings and dust.

- Type: Hydraulic briquette press for wood waste
- Output: 10–25 kg of waste per hour (manufacturer figure), about 80–200 kg in an 8-hour day
- Power consumption: 1.1 kW while running
- Brand: Falach
- Model: 20
- Condition: New
- Price: From £8,480 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-20-briquette-machine/
- Last updated: 18 November 2026

## Key numbers

- 10–25 kg/hr Press Capacity
- 30 × 30 × 30 mm cube Briquette Size
- 68 dB at operator post Noise Level

## Specification

**Key figures**

| Spec | Value |
|---|---|
| Press Capacity | 10–25 kg/hr |
| Briquette Size | 30 × 30 × 30 mm cube |
| Noise Level | 68 dB at operator post |

**Full specification**

| Spec | Value |
|---|---|
| Dimensions (L × W × H) | 1250 × 740 × 1120 mm |
| Weight | 233 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 2.2 kW |
| Power Consumption | 1.1 kW |
| Operation | Continuous |
| Maximum Moisture Content | 15% |
| Specific Weight of Briquettes | 900–1100 kg/m³ |
| Oil Cooler | No |
| Maximum Noise Level | 68 dB at operator post |
| Electrical Supply | 3-phase, 16A (single-phase version available) |

## Check before you buy

- **Your daily waste**: Rated at 10–25 kg an hour, so about 80–200 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
- **Electrics**: Needs 3-phase, 16A (single-phase version available). Check the supply where the press will stand, not just at the board.
- **How dry your waste is**: Works up to 15% moisture. Kiln-dried offcuts are usually fine; green or outdoor-stored timber may not be.
- **Floor space**: The machine measures 1250 × 740 × 1120 mm. Leave room around it to load the hopper and take bags away.
- **Noise**: 68 dB at operator post while running.

## Questions and answers

**How much does the Falach 20 produce?**
10–25 kg/hr of 30 × 30 × 30 mm cube briquettes, with a briquette specific weight of 900–1100 kg/m³.

**Does the Falach 20 run on single-phase?**
The standard machine needs 3-phase 16A. A single-phase version is available at the same capacity.

**How big is the Falach 20?**
1250 × 740 × 1120 mm (L × W × H), weighing 233 kg, with a 0.33 m³ hopper.

**How much power does the Falach 20 use?**
1.1 kW, from a 2.2 kW pump motor. At an example 25p per kWh that is about 28p an hour.

**How loud is the Falach 20?**
68 dB at the operator post, roughly the level of a normal conversation.

**Can I try the Falach 20 Briquette Machine with my own waste?**
Yes. Book a briquetting trial at https://briquette-machines.co.uk/book-a-trial/: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.

**Who installs and services it?**
IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.

**Can I spread the cost?**
Yes. Finance can be arranged. Ask for monthly figures when you enquire, and set them against what you pay for waste collection now.

## How to buy or try it

Call IW Machines on 01636 918280 (Mon–Fri 8am–5pm), email info@iwmachines.co.uk, or send an enquiry at https://briquette-machines.co.uk/machines/falach-20-briquette-machine/#enquire. To test your own waste first, book a briquetting trial at https://briquette-machines.co.uk/book-a-trial/. Compare models at https://briquette-machines.co.uk/compare/ and estimate running costs at https://briquette-machines.co.uk/running-costs/.

## Who runs this site

- Briquette Machines (https://briquette-machines.co.uk/) is run by International Woodworking Machinery Ltd, trading as IW Machines (IWM). Main website: https://www.iwmachines.co.uk/
- What they do: supply, install and service briquette presses that turn wood waste (sawdust, shavings, chippings) into solid briquettes, for joinery workshops, sawmills, pallet makers, timber merchants, furniture makers, shopfitters and wood fuel producers across the UK. Brands: Falach (main range) and BrikStar. Also used and ex-demo briquetters.
- Address: Unit 20, Newark Business Park, 3 Brunel Drive, Newark, Nottinghamshire NG24 2EG, United Kingdom
- Phone: 01636 918280
- Email: info@iwmachines.co.uk
- Opening hours: Mon–Fri 8am–5pm; weekends by appointment
- Also in Newark: Unit 29, service and refurbishment workshop (the showroom and demonstration area is Unit 20)
- IWM founded: April 2009 by Ian Brown, who has worked in the woodworking machinery trade since 1973, when he started as an apprentice at Wadkin
- Companies House number: 06872243
- VAT number: 971462605
- Try before you buy: briquetting trials with the buyer's own waste: https://briquette-machines.co.uk/book-a-trial/
- Enquiries: https://briquette-machines.co.uk/contact/
