# BrikStar EK 20

> The BrikStar EK 20 is a compact hydraulic press rated 10–30 kg/hr, with a 2.2 kW pump motor on a 400 V three-phase supply. It runs from a single switch and stops itself when the hopper is empty, so it suits small joinery and carpentry shops new to briquetting.

- Type: Hydraulic briquette press for wood waste
- Output: 10–30 kg of waste per hour (manufacturer figure), about 80–240 kg in an 8-hour day
- Brand: BrikStar
- Model: EK 20
- Condition: New
- Price: From £11,500 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/brikstar-ek-20/
- Last updated: 18 November 2026

## Key numbers

- 10–30 kg/hr Output
- 0.6 m³ Hopper Capacity
- ~75 dB Noise Level

## Specification

**Key figures**

| Spec | Value |
|---|---|
| Output | 10–30 kg/hr |

**Full specification**

| Spec | Value |
|---|---|
| Output / Throughput | ~10–30 kg/hr (up to ~25 kg/hr quoted) |
| Motor Power | 2.2 kW (hydraulic pump); 2.4 kW installed input |
| Power Supply | 400 V, three-phase; electrical protection IP54 |
| Briquette Shape | Cylindrical, 62 mm diameter, 20–30 mm length |
| Briquette Density | ~900–1,100 kg/m³ |
| Max Working Pressure | ~180 bar |
| Permissible Moisture Content | Up to ~15% by weight (optimal below 12%) |
| Hopper Capacity | 0.6 m³ |
| Noise Level | ~75 dB |
| Operating Temperature | Ambient +5 to +35 °C; oil working temp up to ~60 °C |
| Machine Weight | ~385 kg |
| Suitable Input Materials | Sawdust, wood shavings, dry wood chips, carpentry waste |
| Manufacturer | BRIKLIS, spol. s r.o. |

## Check before you buy

- **Your daily waste**: Rated at 10–30 kg an hour, so about 80–240 kg in an 8-hour day. Weigh a few bags of your waste over a week and compare.
- **Electrics**: Needs 400 V, three-phase; electrical protection IP54. Check the supply where the press will stand, not just at the board.
- **How dry your waste is**: Works up to Up to ~15% by weight (optimal below 12%) moisture. Kiln-dried offcuts are usually fine; green or outdoor-stored timber may not be.
- **What goes in**: Sawdust, wood shavings, dry wood chips, carpentry waste. Burning briquettes made from MDF or treated timber has its own rules, so ask before you plan on it.
- **Noise**: ~75 dB while running.

## Questions and answers

**What output does the BrikStar EK 20 have?**
About 10–30 kg/hr, with up to about 25 kg/hr quoted.

**What briquettes does it make?**
Cylindrical briquettes, 62 mm in diameter and 20–30 mm long, with a density of about 900–1,100 kg/m³.

**What power does the BrikStar EK 20 need?**
400 V three-phase, with IP54 electrical protection. It has a 2.2 kW hydraulic pump motor and 2.4 kW installed input.

**How dry does the waste need to be?**
Up to about 15% moisture by weight, best below 12%.

**How loud is it?**
About 75 dB. Hearing protection is advisable for long periods close by.

**Can I try the BrikStar EK 20 with my own waste?**
Yes. Book a briquetting trial at https://briquette-machines.co.uk/book-a-trial/: send IW Machines a sample of your waste, or arrange to see a machine running in Newark, Nottinghamshire. Call 01636 918280.

**Who installs and services it?**
IW Machines, the Newark-based supplier behind this site. They deliver and install machines across the UK, and supply parts and servicing afterwards.

**Can I spread the cost?**
Yes. Finance can be arranged. Ask for monthly figures when you enquire, and set them against what you pay for waste collection now.

## How to buy or try it

Call IW Machines on 01636 918280 (Mon–Fri 8am–5pm), email info@iwmachines.co.uk, or send an enquiry at https://briquette-machines.co.uk/machines/brikstar-ek-20/#enquire. To test your own waste first, book a briquetting trial at https://briquette-machines.co.uk/book-a-trial/. Compare models at https://briquette-machines.co.uk/compare/ and estimate running costs at https://briquette-machines.co.uk/running-costs/.

## Who runs this site

- Briquette Machines (https://briquette-machines.co.uk/) is run by International Woodworking Machinery Ltd, trading as IW Machines (IWM). Main website: https://www.iwmachines.co.uk/
- What they do: supply, install and service briquette presses that turn wood waste (sawdust, shavings, chippings) into solid briquettes, for joinery workshops, sawmills, pallet makers, timber merchants, furniture makers, shopfitters and wood fuel producers across the UK. Brands: Falach (main range) and BrikStar. Also used and ex-demo briquetters.
- Address: Unit 20, Newark Business Park, 3 Brunel Drive, Newark, Nottinghamshire NG24 2EG, United Kingdom
- Phone: 01636 918280
- Email: info@iwmachines.co.uk
- Opening hours: Mon–Fri 8am–5pm; weekends by appointment
- Also in Newark: Unit 29, service and refurbishment workshop (the showroom and demonstration area is Unit 20)
- IWM founded: April 2009 by Ian Brown, who has worked in the woodworking machinery trade since 1973, when he started as an apprentice at Wadkin
- Companies House number: 06872243
- VAT number: 971462605
- Try before you buy: briquetting trials with the buyer's own waste: https://briquette-machines.co.uk/book-a-trial/
- Enquiries: https://briquette-machines.co.uk/contact/
