# Briquette Machines — everything in one file

Generated 21 November 2026. Machine figures are the manufacturers'; confirm with IW Machines before ordering.

## Who runs this site

- Briquette Machines (https://briquette-machines.co.uk/) is run by International Woodworking Machinery Ltd, trading as IW Machines (IWM). Main website: https://www.iwmachines.co.uk/
- What they do: supply, install and service briquette presses that turn wood waste (sawdust, shavings, chippings) into solid briquettes, for joinery workshops, sawmills, pallet makers, timber merchants, furniture makers, shopfitters and wood fuel producers across the UK. Brands: Falach (main range) and BrikStar. Also used and ex-demo briquetters.
- Address: Unit 20, Newark Business Park, 3 Brunel Drive, Newark, Nottinghamshire NG24 2EG, United Kingdom
- Phone: 01636 918280
- Email: info@iwmachines.co.uk
- Opening hours: Mon–Fri 8am–5pm; weekends by appointment
- Also in Newark: Unit 29, service and refurbishment workshop (the showroom and demonstration area is Unit 20)
- IWM founded: April 2009 by Ian Brown, who has worked in the woodworking machinery trade since 1973, when he started as an apprentice at Wadkin
- Companies House number: 06872243
- VAT number: 971462605
- Try before you buy: briquetting trials with the buyer's own waste: https://briquette-machines.co.uk/book-a-trial/
- Enquiries: https://briquette-machines.co.uk/contact/


# Machines

### Falach 20 Briquette Machine

> The Falach 20 is the smallest press in the Falach range, rated 10–25 kg/hr on a 1250 × 740 mm footprint. It uses 1.1 kW and comes in a single-phase version, so it suits small workshops with a modest, steady flow of dry shavings and dust.

- Type: Hydraulic briquette press for wood waste
- Output: 10–25 kg of waste per hour (manufacturer figure), about 80–200 kg in an 8-hour day
- Power consumption: 1.1 kW while running
- Brand: Falach
- Model: 20
- Condition: New
- Price: From £8,480 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-20-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 10–25 kg/hr Press Capacity
- 30 × 30 × 30 mm cube Briquette Size
- 68 dB at operator post Noise Level

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Press Capacity | 10–25 kg/hr |
| Briquette Size | 30 × 30 × 30 mm cube |
| Noise Level | 68 dB at operator post |

**Full specification**

| Spec | Value |
|---|---|
| Dimensions (L × W × H) | 1250 × 740 × 1120 mm |
| Weight | 233 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 2.2 kW |
| Power Consumption | 1.1 kW |
| Operation | Continuous |
| Maximum Moisture Content | 15% |
| Specific Weight of Briquettes | 900–1100 kg/m³ |
| Oil Cooler | No |
| Maximum Noise Level | 68 dB at operator post |
| Electrical Supply | 3-phase, 16A (single-phase version available) |


### Falach 20XL Briquette Machine

> The Falach 20XL has the same 10–25 kg/hr output and 1250 × 740 mm footprint as the Falach 20, but stands 1450 mm tall with a 0.75 m³ hopper instead of 0.33 m³. It suits small workshops that load by hand and want to fill the hopper less often.

- Type: Hydraulic briquette press for wood waste
- Output: 10–25 kg of waste per hour (manufacturer figure), about 80–200 kg in an 8-hour day
- Power consumption: 1.1 kW while running
- Brand: Falach
- Model: 20XL
- Condition: New
- Price: From £8,980 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-20xl-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 10–25 kg/hr Press Capacity
- 233 kg Weight

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Noise Level | 68 dB at operator position |

**Full specification**

| Spec | Value |
|---|---|
| Dimensions (L × W × H) | 1250 × 740 × 1450 mm |
| Weight | 233 kg |
| Briquette Size | 30 × 30 × 30 mm |
| Press Capacity | 10–25 kg/hr |
| Hopper Volume | 0.75 m³ |
| Pump Motor Input | 2.2 kW |
| Power Consumption | 1.1 kW |
| Electrical Supply | 3-phase, 16A (single-phase option available) |
| Operation | Continuous |
| Maximum Moisture Content | 15% |
| Specific Weight of Briquette | 900–1100 kg/m³ |
| Oil Cooler | No |
| Briquette Collection | Briquette chute and single bag stand supplied as standard |
| Maximum Noise Level | 68 dB at operator position |


### BrikStar EK 20

> The BrikStar EK 20 is a compact hydraulic press rated 10–30 kg/hr, with a 2.2 kW pump motor on a 400 V three-phase supply. It runs from a single switch and stops itself when the hopper is empty, so it suits small joinery and carpentry shops new to briquetting.

- Type: Hydraulic briquette press for wood waste
- Output: 10–30 kg of waste per hour (manufacturer figure), about 80–240 kg in an 8-hour day
- Brand: BrikStar
- Model: EK 20
- Condition: New
- Price: From £11,500 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/brikstar-ek-20/
- Last updated: 18 November 2026

#### Key numbers

- 10–30 kg/hr Output
- 0.6 m³ Hopper Capacity
- ~75 dB Noise Level

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Output | 10–30 kg/hr |

**Full specification**

| Spec | Value |
|---|---|
| Output / Throughput | ~10–30 kg/hr (up to ~25 kg/hr quoted) |
| Motor Power | 2.2 kW (hydraulic pump); 2.4 kW installed input |
| Power Supply | 400 V, three-phase; electrical protection IP54 |
| Briquette Shape | Cylindrical, 62 mm diameter, 20–30 mm length |
| Briquette Density | ~900–1,100 kg/m³ |
| Max Working Pressure | ~180 bar |
| Permissible Moisture Content | Up to ~15% by weight (optimal below 12%) |
| Hopper Capacity | 0.6 m³ |
| Noise Level | ~75 dB |
| Operating Temperature | Ambient +5 to +35 °C; oil working temp up to ~60 °C |
| Machine Weight | ~385 kg |
| Suitable Input Materials | Sawdust, wood shavings, dry wood chips, carpentry waste |
| Manufacturer | BRIKLIS, spol. s r.o. |


### Ex Demo BrikStar EK Briquetting Machine

> An ex-demo BrikStar EK briquette press. The model is rated 10–30 kg/hr, with a 2.2 kW motor on a 400 V three-phase supply, so it suits small workshops wanting a simple, low-power press at an ex-demo price.

- Type: Hydraulic briquette press for wood waste
- Output: 10–30 kg of waste per hour (manufacturer figure), about 80–240 kg in an 8-hour day
- Brand: BrikStar
- Model: EK
- Condition: Ex-demo
- Price: Price on request
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/ex-demo-brikstar-ek-briquetting-machine/
- Last updated: 18 November 2026

#### Key numbers

- 10–30 kg/hr Output
- 0.6 m³ Hopper Capacity
- ~75 dB Noise Level

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Output | 10–30 kg/hr |

**Full specification**

| Spec | Value |
|---|---|
| Output / Throughput | ~10–30 kg/hr (up to ~25 kg/hr quoted) |
| Motor Power | 2.2 kW (hydraulic pump); 2.4 kW installed input |
| Power Supply | 400 V, three-phase; electrical protection IP54 |
| Briquette Shape | Cylindrical, 62 mm diameter, 20–30 mm length |
| Briquette Density | ~900–1,100 kg/m³ |
| Max Working Pressure | ~180 bar |
| Permissible Moisture Content | Up to ~15% by weight (optimal below 12%) |
| Hopper Capacity | 0.6 m³ |
| Noise Level | ~75 dB |
| Operating Temperature | Ambient +5 to +35 °C; oil working temp up to ~60 °C |
| Machine Weight | ~385 kg |
| Suitable Input Materials | Sawdust, wood shavings, dry wood chips, carpentry waste |
| Manufacturer | BRIKLIS, spol. s r.o. |


### Falach 30 Briquette Machine

> The Falach 30 is rated 25–35 kg/hour, makes 50 mm briquettes and uses 2.2 kW on a 3-phase 16 amp supply. It suits workshops with a steady flow of waste, including MDF, that are happy to feed and supervise the press, since it has no agitator or automatic switch-out.

- Type: Hydraulic briquette press for wood waste
- Output: 25–35 kg of waste per hour (manufacturer figure), about 200–280 kg in an 8-hour day
- Power consumption: 2.2 kW while running
- Brand: Falach
- Model: 30
- Condition: New
- Price: From £9,980 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-30-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 25–35 kg/hour Output
- 50 mm Briquette Diameter
- 68 dB Noise Level

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Output | 25–35 kg/hour |

**Full specification**

| Spec | Value |
|---|---|
| Capacity | 25–35 kg/hour |
| Briquette Diameter | 50 mm |
| Dimensions (L × W × H) | 1860 × 890 × 1100 mm |
| Weight | 400 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 4 kW |
| Power Consumption | 2.2 kW |
| Power Supply | 3-phase, 16 amp |
| Suitable Input Materials | All types of wood waste — shavings, dust, chippings including MDF |
| Operation | Continuous |
| Oil Cooler | No |
| Auto Reverse Vertical Agitator | No |
| Automatic Switch-out | No |
| Electrically Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Funnel-shaped Hopper | Yes |
| Noise Level | 68 dB |
| Warranty | 12 months |


### Falach 35 Briquette Machine

> The Falach 35 is rated 30–40 kg/hour and uses 2.2 kW on 3-phase 16A, in the same 1860 × 890 mm frame as the Falach 30. It adds an auto reverse agitator and automatic switch-out, so it suits busy joinery and timber workshops that want the press to run with less supervision.

- Type: Hydraulic briquette press for wood waste
- Output: 30–40 kg of waste per hour (manufacturer figure), about 240–320 kg in an 8-hour day
- Power consumption: 2.2 kW while running
- Brand: Falach
- Model: 35
- Condition: New
- Price: From £10,980 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-35-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 30–40 kg/hour Production Output
- 68 dB Noise Level

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Briquette Size | 50 mm diameter · 35–50 mm length |

**Full specification**

| Spec | Value |
|---|---|
| Production Output | 30–40 kg/hour |
| Briquette Diameter | 50 mm |
| Briquette Length | 35–50 mm |
| Accepted Materials | All wood waste — shavings, dust, chippings, MDF |
| Dimensions (L × W × H) | 1860 × 890 × 1100 mm |
| Weight | 400 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 4 kW |
| Power Consumption | 2.2 kW |
| Power Supply | 3-phase, 16A |
| Operation | Continuous |
| Oil Cooler | No |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Electrically Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Noise Level | 68 dB |
| Certification | UKCA |
| Lead Time | 4–6 weeks |


### Ex Demo Falach 50 Briquette Machine

> IWM's demonstration Falach 50, offered with a 5 bag carousel unit and a 6-month parts warranty. The model is rated 40–60 kg/hour on 3-phase 16A, so it suits busy workshops that want a press and bagging together at an ex-demo price.

- Type: Hydraulic briquette press for wood waste
- Output: 40–60 kg of waste per hour (manufacturer figure), about 320–480 kg in an 8-hour day
- Power consumption: 3.8 kW while running
- Brand: Falach
- Model: 50
- Condition: Ex-demo
- Price: Price on request
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/ex-demo-falach-50-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 40–60 kg/hour Production Rate
- 50mm Briquette Diameter
- 68 dB Noise Level

#### Specification

| Spec | Value |
|---|---|
| Production Rate | 40–60 kg/hour |
| Briquette Diameter | 50mm |
| Briquette Density | 700–900 kg/m³ |
| Material Compatibility | All wood waste — shavings, dust, chippings, MDF; max moisture 15%; max chip size 15mm |
| Dimensions (L × W × H) | 1860 × 890 × 1100 mm |
| Weight | 390 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 5.5 kW |
| Power Consumption | 3.8 kW |
| Power Supply | 3-phase, 16A |
| Operation | Continuous |
| Oil Cooler | Yes |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Electrically Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Noise Level | 68 dB |
| Certification | UKCA; Clean Air Strategy compliant |


### Falach 50 Briquette Machine

> The Falach 50 is rated 40–60 kg/hour on a 3-phase 16A supply, using 3.8 kW, and runs continuously with an oil cooler, agitator and automatic switch-out. At 1100 mm high it suits busy joinery and timber workshops with lower headroom.

- Type: Hydraulic briquette press for wood waste
- Output: 40–60 kg of waste per hour (manufacturer figure), about 320–480 kg in an 8-hour day
- Power consumption: 3.8 kW while running
- Brand: Falach
- Model: 50
- Condition: New
- Price: From £12,480 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-50-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 40–60 kg/hour Production Rate
- 50mm Briquette Diameter
- 68 dB Noise Level

#### Specification

| Spec | Value |
|---|---|
| Production Rate | 40–60 kg/hour |
| Briquette Diameter | 50mm |
| Briquette Density | 700–900 kg/m³ |
| Material Compatibility | All wood waste — shavings, dust, chippings, MDF; max moisture 15%; max chip size 15mm |
| Dimensions (L × W × H) | 1860 × 890 × 1100 mm |
| Weight | 390 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 5.5 kW |
| Power Consumption | 3.8 kW |
| Power Supply | 3-phase, 16A |
| Operation | Continuous |
| Oil Cooler | Yes |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Electrically Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Noise Level | 68 dB |
| Certification | UKCA; Clean Air Strategy compliant |


### Falach 50XL Briquette Machine

> The Falach 50XL is rated 40–60 kg/hour and uses 3.8 kW on 3-phase 16A, like the Falach 50, but has a 0.80 m³ hopper and a vibration unit. It suits workshops with enough waste to run a press all day and want to fill the hopper less often.

- Type: Hydraulic briquette press for wood waste
- Output: 40–60 kg of waste per hour (manufacturer figure), about 320–480 kg in an 8-hour day
- Power consumption: 3.8 kW while running
- Brand: Falach
- Model: 50XL
- Condition: New
- Price: From £13,980 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 40–60 kg/hour Output
- 0.80 m³ Hopper Volume
- 68 dB Noise Level

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Briquette Size | 50 mm diameter · 35–50 mm length (adjustable) |

**Full specification**

| Spec | Value |
|---|---|
| Output | 40–60 kg/hour |
| Briquette Diameter | 50 mm |
| Briquette Length | 35–50 mm (adjustable) |
| Operation | Continuous |
| Accepted Waste Types | All wood waste — shavings, dust, chippings, MDF |
| Hopper Volume | 0.80 m³ |
| Pump Motor Input | 5.5 kW |
| Power Consumption | 3.8 kW |
| Electrical Supply | 3-phase, 16A |
| Dimensions (L × W × H) | 1960 × 1150 × 1350 mm |
| Weight | 430 kg |
| Noise Level | 68 dB |
| Certification | UKCA compliant |
| Oil Cooler | Yes |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Electrical Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Vibration Unit | Yes |


### Reconditioned Falach 50 Briquette machine

> A reconditioned Falach 50 with a 6 month parts warranty. The model is rated 40–60 kg/hour, uses 3.8 kW on 3-phase 16A and has an oil cooler, agitator and automatic switch-out, so it suits busy workshops wanting Falach 50 output at a used price.

- Type: Hydraulic briquette press for wood waste
- Output: 40–60 kg of waste per hour (manufacturer figure), about 320–480 kg in an 8-hour day
- Power consumption: 3.8 kW while running
- Brand: Falach
- Model: 50
- Condition: Used
- Price: Price on request
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/reconditioned-falach-50-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 40–60 kg/hour Production Rate
- 50mm Briquette Diameter
- 68 dB Noise Level

#### Specification

| Spec | Value |
|---|---|
| Production Rate | 40–60 kg/hour |
| Briquette Diameter | 50mm |
| Briquette Density | 700–900 kg/m³ |
| Material Compatibility | All wood waste — shavings, dust, chippings, MDF; max moisture 15%; max chip size 15mm |
| Dimensions (L × W × H) | 1860 × 890 × 1100 mm |
| Weight | 390 kg |
| Hopper Volume | 0.33 m³ |
| Pump Motor Input | 5.5 kW |
| Power Consumption | 3.8 kW |
| Power Supply | 3-phase, 16A |
| Operation | Continuous |
| Oil Cooler | Yes |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Electrically Interlocked Lid | Yes |
| Chromed Piston and Press Chamber | Yes |
| Noise Level | 68 dB |
| Certification | UKCA; Clean Air Strategy compliant |


### IWM Soukup Briquette Machine (60 &#8211; 70)

> This used Soukup press produces 60–70 kg/hour of 60 mm briquettes from shavings and dust, running continuously on a 3-phase 32A supply with a 7.5 kW pump motor. It suits workshops with steady, high volumes that want a lower-cost entry to briquetting and are happy with a used machine.

- Type: Hydraulic briquette press for wood waste
- Output: 60–70 kg of waste per hour (manufacturer figure), about 480–560 kg in an 8-hour day
- Brand: Soukup
- Model: 60 - 70
- Condition: Used
- Price: From £12,500 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/soukup-briquette-machine-60-70/
- Last updated: 18 November 2026

#### Key numbers

- 60–70 kg/hour Output
- 60 mm Briquette Diameter
- Continuous Operation

#### Specification

**Key figures**

| Spec | Value |
|---|---|
| Output | 60–70 kg/hour |

**Full specification**

| Spec | Value |
|---|---|
| Production | 60–70 kg/hour |
| Briquette Diameter | 60 mm |
| Dimensions (L × W × H) | 1940 × 1250 × 1470 mm |
| Weight | 1270 kg |
| Pump Motor Input | 7.5 kW |
| Power Supply | 3-phase, 32A |
| Operation | Continuous |
| Automatic Switch-out | Yes |
| Oil Cooler | No |
| Noise Level | 68 dB |
| Condition | Used |
| Manufacturer | Soukup |


### Falach 70 Briquette Machine

> The Falach 70 is rated 60–80 kg/hour and makes 70 mm briquettes from virgin wood sawdust and shavings, using 4.9 kW on a 3-phase 32 amp supply. Its briquettes are listed as UK Clean Air Strategy compliant (virgin wood only), so it suits sawmills, timber merchants and busy joinery shops cutting clean timber.

- Type: Hydraulic briquette press for wood waste
- Output: 60–80 kg of waste per hour (manufacturer figure), about 480–640 kg in an 8-hour day
- Power consumption: 4.9 kW while running
- Brand: Falach
- Model: 70
- Condition: New
- Price: From £19,980 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-70-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 60–80 kg/hour Production Rate
- 70 mm Briquette Diameter
- 4.9 kW Power Consumption
- 68 dB Noise Level

#### Specification

| Spec | Value |
|---|---|
| Production Rate | 60–80 kg/hour |
| Briquette Diameter | 70 mm |
| Briquette Length | 40–60 mm |
| Dimensions (L × W × H) | 2220 × 1200 × 1510 mm |
| Weight | 840 kg |
| Hopper Volume | 0.75 m³ |
| Pump Motor Input | 7.5 kW |
| Power Consumption | 4.9 kW |
| Electrical Supply | 3-phase, 32 amp |
| Operation | Continuous |
| Oil Cooler | No |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Noise Level | 68 dB |
| Briquette Certification | UK Clean Air Strategy compliant (virgin wood only) |


### Falach 100 Briquette Machine

> The Falach 100 is the largest Falach press, rated 90–120 kg/hour of 70 mm briquettes, using 8.2 kW on a 3-phase 32 amp supply. With an oil cooler, agitator and automatic switch-out, it suits sawmills, large joinery works and wood fuel producers running all day.

- Type: Hydraulic briquette press for wood waste
- Output: 90–120 kg of waste per hour (manufacturer figure), about 720–960 kg in an 8-hour day
- Power consumption: 8.2 kW while running
- Brand: Falach
- Model: 100
- Condition: New
- Price: From £24,980 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-100-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 90–120 kg/hour Production Output
- 70 mm Briquette Diameter
- 8.2 kW Power Consumption
- 62 dB (max, under load) Noise Level

#### Specification

| Spec | Value |
|---|---|
| Production Output | 90–120 kg/hour |
| Briquette Diameter | 70 mm |
| Briquette Length | 45 mm (adjustable via potentiometer) |
| Briquette Density | 900–1,100 kg/m³ |
| Compression Method | Hydraulic piston, 10 tons per square inch |
| Accepted Materials | All wood waste types: shavings, dust, chippings, MDF — max 15% moisture content |
| Dimensions (L × W × H) | 2220 × 1200 × 1510 mm |
| Weight | 810 kg |
| Hopper Volume | 0.75 m³ |
| Pump Motor Input | 11 kW |
| Power Consumption | 8.2 kW |
| Electrical Supply | 3-phase, 32 amp |
| Operation | Continuous |
| Oil Cooler | Yes |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Noise Level | 62 dB (max, under load) |
| Certification | UKCA |
| Lead Time | Normally 4–6 weeks from receipt of order |
| Installation & Commissioning | Available at additional cost |


### Reconditioned Falach 100 Briquette machine

> A reconditioned Falach 100 with a 6 month parts warranty. The model is rated 90–120 kg/hour of 70 mm briquettes, using 8.2 kW on 3-phase 32 amp, so it suits high-volume sawmills, joinery works and fuel producers that want top Falach output at a used price.

- Type: Hydraulic briquette press for wood waste
- Output: 90–120 kg of waste per hour (manufacturer figure), about 720–960 kg in an 8-hour day
- Power consumption: 8.2 kW while running
- Brand: Falach
- Model: 100
- Condition: Used
- Price: Price on request
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/reconditioned-falach-100-briquette-machine/
- Last updated: 18 November 2026

#### Key numbers

- 90–120 kg/hour Production Output
- 70 mm Briquette Diameter
- 8.2 kW Power Consumption
- 62 dB (max, under load) Noise Level

#### Specification

| Spec | Value |
|---|---|
| Production Output | 90–120 kg/hour |
| Briquette Diameter | 70 mm |
| Briquette Length | 45 mm (adjustable via potentiometer) |
| Briquette Density | 900–1,100 kg/m³ |
| Compression Method | Hydraulic piston, 10 tons per square inch |
| Accepted Materials | All wood waste types: shavings, dust, chippings, MDF — max 15% moisture content |
| Dimensions (L × W × H) | 2220 × 1200 × 1510 mm |
| Weight | 810 kg |
| Hopper Volume | 0.75 m³ |
| Pump Motor Input | 11 kW |
| Power Consumption | 8.2 kW |
| Electrical Supply | 3-phase, 32 amp |
| Operation | Continuous |
| Oil Cooler | Yes |
| Auto Reverse Vertical Agitator | Yes |
| Automatic Switch-out | Yes |
| Noise Level | 62 dB (max, under load) |
| Certification | UKCA |
| Lead Time | Normally 4–6 weeks from receipt of order |
| Installation & Commissioning | Available at additional cost |


### Reconditioned BrikStar C3-14 Briquette machine

> A reconditioned BrikStar C3-14 hydraulic briquette press, sold with a 6 month parts warranty. We don't have a full specification published for this unit, so ask IWM for its output, power supply and condition before you decide.

- Type: Hydraulic briquette press for wood waste
- Brand: BrikStar
- Model: C3-14
- Condition: Used
- Price: Price on request
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/reconditioned-brikstar-c3-14-briquette-machine/
- Last updated: 18 November 2026


### IWM Six Bag Carousel Unit with Top Loading

> The IWM Six Bag Carousel is a top-loading bagging unit with six bag positions, each taking approximately 20–25 kg. It is mechanical, needs no power and is made to fit most briquette machines, so it suits busy presses where bag changes would otherwise hold up production.

- Type: Briquette bagging unit
- Brand: IWM
- Model: Six Bag Carousel Unit with Top Loading
- Condition: New
- Price: From £1,680 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/iwm-six-bag-carousel-unit-with-top-loading/
- Last updated: 18 November 2026

#### Key numbers

- 6 Bag Positions
- Approx. 20–25 kg per bag Bag Fill Weight
- Top loading Loading Method

#### Specification

| Spec | Value |
|---|---|
| Bag Positions | 6 |
| Bag Fill Weight | Approx. 20–25 kg per bag |
| Loading Method | Top loading |
| Compatibility | Universal — bespoke-made to fit most briquette machines |
| Dimensions | Confirmed on enquiry |
| Weight | 200 kg |
| Power Requirement | None — mechanical operation |
| Replacement Bags | Available in packs of 50 — £19.98 + VAT, ex works Newark |
| Environmentally Friendly Boxes | Available in packs of 50 — POA |
| Lead Time | Normally ex stock |


### Falach Five Bag Carousel Units

> The Falach Five Bag Carousel fills five 20–25 kg bags in turn, driven by the press itself, so it needs no separate power. It fits the Falach 30, 35, 50, 70 and 100, in 50 mm and 70 mm variants, and suits anyone bagging briquettes for storage or heating.

- Type: Briquette bagging unit
- Brand: Falach
- Model: Five Bag Carousel Units
- Condition: New
- Price: From £1,480 + VAT
- Supplied by: IW Machines, Newark, UK (01636 918280)
- Page: https://briquette-machines.co.uk/machines/falach-five-bag-carousel-units/
- Last updated: 18 November 2026

#### Key numbers

- 5 × 20–25 kg bags Bag Capacity
- Approx. 20–25 kg per bag Bag Fill Weight

#### Specification

| Spec | Value |
|---|---|
| Bag Capacity | 5 × 20–25 kg bags |
| Bag Fill Weight | Approx. 20–25 kg per bag (material-dependent) |
| External Drive Required | No — powered directly by the press |
| Fill Method | Automatic — briquettes drop directly into each bag in sequence |
| Briquette Diameter | 50 mm or 70 mm (two variants available) |
| Weight | 200 kg |
| Dimensions | Confirmed during consultation with IWM |
| Compatible Presses | Falach 30, 35, 50, 70 and 100 |
| Bag Supply | Bags available in boxes of 200 from IWM |
| Assembly | Supplied fully assembled |



# Guides and answers

## What to do with sawdust

> A business making sawdust has five main options: pay for skips or collections, give it away for animal bedding, burn it loose, press it into briquettes, or sell it. Skips are simplest but cost money every month. Briquetting suits workshops with a steady flow of dry waste, because it cuts the volume and turns the waste into fuel you can use or give away.

- URL: https://briquette-machines.co.uk/what-to-do-with-sawdust/
- Updated: 18 November 2026

## The five options at a glance

Option |
Upfront cost |
Ongoing cost |
Effort |
Best for |

Skip or waste collection |
None |
Every collection |
Low |
Small or occasional volumes |

Give away for animal bedding |
None |
Little or none |
Depends on the taker |
Clean softwood shavings, with a reliable local taker |

Burn it loose |
An appliance that can take it |
Low |
Medium |
Sites with a suitable burner and clean waste |

Briquette it |
A press, from £8,480 + VAT new |
Electricity, bags, servicing |
Low to medium |
Steady, dry waste streams |

Sell it |
Bagging or storage |
Handling time |
Medium to high |
Clean waste in volume, with buyers nearby |

## 1. Skip hire or waste collection

The default for most workshops. Fill a skip or bags, and someone takes them away.

- **For:** no equipment, no effort, works for any waste.

- **Against:** you pay every time, and loose sawdust and shavings are bulky but light, so you pay to move a lot of air. And the cost never stops.

Read our side-by-side: [skip hire vs briquetting](/skip-hire-vs-briquetting/).

## 2. Give it away for animal bedding

Horse owners, farms, smallholders and pet owners often take clean shavings.

- **For:** free, and it does some good locally.

- **Against:** takers can be unreliable, especially in summer. Most want clean, dry, untreated softwood shavings, and often don’t want fine dust, hardwood or anything with MDF in it. You still have to store it until they come. And you may have no outlet at all in some weeks.

## 3. Burn it loose

Some wood waste heaters and boilers can burn shavings or sawdust.

- **For:** you use the energy on site.

- **Against:** loose sawdust is awkward to burn. It’s fine, can smother a fire and needs an appliance designed for it. Burning waste wood is regulated. Board, MDF and treated timber may need a permit or registered exemption, and smoke control areas have their own rules.

## 4. Press it into briquettes

A briquette machine compresses dry sawdust and shavings into dense briquettes, with no glue. Lignin, the natural binder in wood, holds them together.

- **For:** the volume typically falls several times over, so you store less and handle less. Dry wood briquettes typically hold around 4.5–5 kWh of energy per kg and burn more like logs than loose dust. You can burn them in a suitable heater or give them away. And it works whatever the season.

- **Against:** it costs money up front. The waste must be dry, below about 15% moisture. Offcuts need shredding first. And briquettes made from board or treated timber still come under the waste wood rules.

Model |
Output |
Power use |
Supply |
Price |

[Falach 20](/machines/falach-20-briquette-machine/) |
10–25 kg/hr |
1.1 kW |
3-phase, 16A (single-phase version available) |
From £8,480 + VAT |

[Falach 30](/machines/falach-30-briquette-machine/) |
25–35 kg/hour |
2.2 kW |
3-phase, 16 amp |
From £9,980 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
From £13,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
From £24,980 + VAT |

The electricity is a small part of the cost. Our arithmetic from the published figures puts it at around 63–78 kWh per tonne across the Falach range. See [running costs](/running-costs/) for the worked examples.

## 5. Sell it

You can sell sawdust and shavings loose or in bags. Briquettes are fuel, which brings extra rules.

- **Loose or bagged waste:** some buyers want it for bedding, composting or other uses. Prices are often low and buyers fussy about quality.

- **Briquettes:** selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any.

## Which option is right for you?

- **A bag or two a week:** skips, collection or a bedding taker is probably fine.

- **A steady flow every day, mostly dry:** briquetting is worth costing out. Start with the [Falach 20](/machines/falach-20-briquette-machine/) for small volumes, or the [Falach 35](/machines/falach-35-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/) for busy shops.

- **Large volumes, clean timber:** briquetting on a larger scale. Look at the [Falach 70](/machines/falach-70-briquette-machine/) and [Falach 100](/machines/falach-100-briquette-machine/).

- **Mostly MDF or board:** briquetting to cut volume, with care over what you then do with the briquettes. Read [MDF and board dust](/waste/mdf-and-board-dust/).

- **Wet sawmill sawdust:** selling or giving it away may be easier unless you can dry it. See [sawmills](/for/sawmills/).

## Real examples

Quality Pods Wales, which makes bespoke glamping pods, turns its wood waste into briquettes in one of our machines and uses them to heat its facilities with wood waste heaters. First Grade Projects, a maker of bespoke furniture and cubicle systems, shreds its waste and presses it into briquettes for heating, and reports recycling over 90% of raw material waste that used to go to skips. See more [case studies](/blog/category/customer-stories/).

## How to decide, step by step

- Weigh your waste for a typical week.

- Note what it costs you now, in skips, bags or time.

- Check how dry it is and whether it includes board.

- Run the numbers on the [running costs page](/running-costs/).

- Send us a sample to see how it presses.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**What is the cheapest way to get rid of sawdust?**
Giving it away costs nothing if you have a reliable taker. For steady volumes, briquetting can cost less over time than paying for skips, but it needs a machine up front. Run your own numbers.

**Can I put sawdust in a general waste skip?**
Usually, but check with your skip firm. Some want wood waste kept separate, and loose sawdust is bulky, so you pay to move a lot of volume.

**Can I burn sawdust?**
Loose sawdust is hard to burn well and needs a suitable appliance. Burning waste wood is regulated, especially board and treated timber. Pressing it into briquettes makes it easier to burn.

**Is sawdust worth money?**
Sometimes, as bedding. As briquettes, its main value is the heat you get and the skip costs you save. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any.

**How do I turn sawdust into fuel?**
Press it into briquettes with a briquette machine. It needs to be dry, below about 15% moisture. No glue is needed.

**What do I do with MDF dust?**
It can be briquetted on several Falach models, which cuts its volume. Burning MDF briquettes may need a permit or exemption, so check with your regulator.


## Skip hire vs briquetting

> Skip hire costs nothing up front but you pay for every skip, forever. A briquette machine costs money up front, then mainly electricity: around 63–78 kWh per tonne on a Falach press, by our arithmetic from the published figures. Which costs less depends on how many skips you fill and what you pay for each.

- URL: https://briquette-machines.co.uk/skip-hire-vs-briquetting/
- Updated: 18 November 2026

## What does skip hire really cost for wood waste?

Skip prices vary by region, size and waste type, so use your own invoices. Then think about what’s in the skip. Loose dry shavings typically weigh around 60–120 kg per m³. An 8-yard skip holds about 6.1 m³, so it might carry only a few hundred kilos of shavings. You’re paying mostly to move air.

## Worked example

**These inputs are example figures. Replace them with your own.**

Input |
Example figure |

Skip size |
8-yard (about 6.1 m³) |

Skips per month |
3 |

Cost per skip |
£280 |

Weight of waste |
100 kg per m³ |

Electricity price |
25p per kWh |

Machine |
[Falach 35](/machines/falach-35-briquette-machine/): 2.2 kW, 30–40 kg/hour (we use 35 kg/hour) |

### Skip hire

- 3 skips × £280 = **£840 a month**

- £840 × 12 = **£10,080 a year**

### Briquetting the same waste

- Waste: 3 skips × 6.1 m³ × 100 kg = 1,830 kg a month

- Press hours: 1,830 ÷ 35 = 52.3 hours a month

- Electricity: 52.3 × 2.2 kW = 115.0 kWh

- 115.0 kWh × £0.25 = **£28.76 a month**

The electricity is small next to the skips. But that isn’t the whole comparison.

## What else goes on the briquetting side?

- **The machine.** The [Falach 35](/machines/falach-35-briquette-machine/) is from £10,980 + VAT. Finance can be arranged.

- **Bags or boxes** for the briquettes.

- **Servicing and wear parts.** Ask IWM for the model you’re considering.

- **Operator time** to load the hopper, if it isn’t fed from extraction, and to move bags.

- **Remaining skips.** You’ll still have offcuts, packaging and general waste, though perhaps fewer skips.

- **Floor space**: 1860 × 890 mm for the Falach 35, plus working room.

- **Rules** on burning, especially if your waste includes MDF.

And on the other side, the briquettes. Dry wood briquettes typically hold around 4.5–5 kWh of energy per kg. Whether you burn them in a suitable heater or give them away, they’re no longer a cost to remove, and less waste goes to skips and landfill.

## Side by side

|
Skip hire |
Briquetting |

Upfront cost |
None |
Machine, from £8,480 + VAT new |

Ongoing cost |
Every skip |
Electricity, bags, servicing |

Space |
Skip on site, bags of loose waste |
Machine footprint, bagged briquettes |

What you’re left with |
Nothing |
Fuel to use or give away |

Waste type |
Anything |
Dry dust, shavings and small chips |

Fire and dust |
Loose waste on site |
Less loose waste lying around |

## When does skip hire make more sense?

- You only fill a skip every month or two

- Your waste is mostly wet, large offcuts or mixed rubbish

- You have no space or power supply for a press

## When does briquetting make more sense?

- Several skips or many bags a month of dry dust and shavings

- You can use the briquettes for heat in a suitable heater

- Space for skips or bags is tight

## Which machine for your volume?

Model |
Output |
Power use |
Supply |
Price |

[Falach 20](/machines/falach-20-briquette-machine/) |
10–25 kg/hr |
1.1 kW |
3-phase, 16A (single-phase version available) |
From £8,480 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
From £10,980 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
3-phase, 32 amp |
From £19,980 + VAT |

Put your own figures into the [running costs calculator](/running-costs/), or [send us a sample](/book-a-trial/) to see how your waste presses.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h

### Questions and answers

**How much does skip hire cost for wood waste?**
It varies by region, skip size and waste type. Check your own invoices. The figures on this page are examples only.

**How much wood waste fits in a skip?**
By volume, an 8-yard skip holds about 6.1 m³. By weight, loose dry shavings typically weigh around 60–120 kg per m³, so a skip may hold only a few hundred kilos.

**Does a briquette machine get rid of skips completely?**
Rarely. You will usually still need some skips for offcuts, packaging and general waste, but often fewer.

**What does it cost to run a briquette press per month?**
Multiply press hours by the machine's power use and your electricity price. In our example, a Falach 35 pressing 1,830 kg a month uses about 115 kWh, or £28.76 at an example 25p per kWh.

**How long until a briquette machine pays for itself?**
It depends entirely on your figures. Add up the machine, bags, servicing and electricity, and compare with your skip costs. We won't give a payback figure without your numbers.


## Briquette machine buying guide

> To choose a briquette machine, weigh how much dry waste you make each week, divide it by the hours the press will run, and pick a model that handles that figure comfortably. Then check your power supply, floor space, moisture content and materials.

- URL: https://briquette-machines.co.uk/buying-guide/
- Updated: 18 November 2026

## Step 1: How much waste do you make?

Everything starts here. Weigh a full extraction bag, count how many you fill in a normal week, and multiply. If you use skips, note the skip size, how often it goes and what you pay. Do this over two or three weeks if your work varies.

## Step 2: What output do you need?

Divide your weekly waste in kg by the hours the press will run. A press that runs alongside your machines for a 40-hour week needs a lower rating than one that only runs on Friday afternoons.

**Example:** 1,000 kg a week ÷ 40 hours = 25 kg per hour. That points to the [Falach 30](/machines/falach-30-briquette-machine/) (25–35 kg/hour) or [Falach 35](/machines/falach-35-briquette-machine/) (30–40 kg/hour). Leave some headroom. A press working at the top of its range all day leaves no margin for busy weeks or harder material.

Model |
Output |
Supply |
Price |

[Falach 20](/machines/falach-20-briquette-machine/) |
10–25 kg/hr |
3-phase, 16A (single-phase version available) |
From £8,480 + VAT |

[Falach 20XL](/machines/falach-20xl-briquette-machine/) |
10–25 kg/hr |
3-phase, 16A (single-phase option available) |
From £8,980 + VAT |

[Falach 30](/machines/falach-30-briquette-machine/) |
25–35 kg/hour |
3-phase, 16 amp |
From £9,980 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
3-phase, 16A |
From £10,980 + VAT |

[BrikStar EK 20](/machines/brikstar-ek-20/) |
10–30 kg/hr |
400 V, three-phase |
From £11,500 + VAT |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3-phase, 16A |
From £12,480 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3-phase, 16A |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
3-phase, 32 amp |
From £19,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
3-phase, 32 amp |
From £24,980 + VAT |

## Step 3: What power supply do you have?

- **Single-phase:** the [Falach 20](/machines/falach-20-briquette-machine/) and [Falach 20XL](/machines/falach-20xl-briquette-machine/) have single-phase versions.

- **3-phase 16A:** Falach 20, 20XL, 30, 35, 50 and 50XL.

- **3-phase 32 amp:** [Falach 70](/machines/falach-70-briquette-machine/) and [Falach 100](/machines/falach-100-briquette-machine/).

- **400 V three-phase:** [BrikStar EK 20](/machines/brikstar-ek-20/).

Check the supply at the spot where the machine will stand, not just at the board.

## Step 4: Will it fit?

The Falach 20 and 20XL have the smallest footprint at 1250 × 740 mm. The Falach 30, 35 and 50 are 1860 × 890 mm. The Falach 70 and 100 are 2220 × 1200 mm and weigh over 800 kg. Allow room around the machine to load the hopper, change bags and service it, and check the height if the press sits under a cyclone or chute.

## Step 5: Is your waste dry and small enough?

Falach presses list a maximum moisture content of 15%. The Falach 50 lists a maximum chip size of 15 mm. Larger offcuts need a shredder first. See our guides to [moisture content](/waste/moisture-content/) and [wood chippings](/waste/wood-chippings/).

## Step 6: What materials are in it?

Softwood, hardwood, MDF and board dust all behave differently. Several Falach models accept MDF. The Falach 70 is listed as Clean Air Strategy compliant for virgin wood only. If your waste includes board or treated timber, read [our MDF guide](/waste/mdf-and-board-dust/).

## Step 7: How much attention can you give it?

An auto reverse agitator stops waste bridging in the hopper, and automatic switch-out stops the press when it runs out of material. The Falach 35, 50, 50XL, 70 and 100 have both. The Falach 30 has neither, so expect to watch it more. An oil cooler (Falach 50, 50XL and 100) helps on long, hard runs.

## Step 8: How will you bag and store briquettes?

A bag carousel saves standing over the machine. The [Falach Five Bag Carousel](/machines/falach-five-bag-carousel-units/) fits the Falach 30, 35, 50, 70 and 100. The [IWM Six Bag Carousel](/machines/iwm-six-bag-carousel-unit-with-top-loading/) is made to fit most machines. Store briquettes somewhere dry.

## Step 9: New or used?

A [used or ex-demo machine](/used-briquette-machines/) can cost less, but stock changes and the choice of size is limited. The Falach 35 and 100, for example, list a lead time of 4–6 weeks.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 30 Briquette Machine](https://briquette-machines.co.uk/machines/falach-30-briquette-machine.md): 25–35 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**What is the most important thing when choosing a briquette machine?**
Output. Match the press's kg per hour to your weekly waste and the hours it will run. Get that right and most other choices follow.

**Should I buy a bigger machine than I need?**
A little headroom is sensible, so the press isn't flat out every hour. Buying far too big costs more up front and needs a bigger power supply and more space.

**What is the smallest briquette machine you sell?**
The Falach 20 and 20XL at 10–25 kg/hr, with a 1250 × 740 mm footprint. The BrikStar EK 20 is rated 10–30 kg/hr.

**Do I need a shredder as well?**
Only if you have offcuts or chips larger than the press accepts. The Falach 50, for example, lists a maximum chip size of 15 mm.

**Can you help me work out the size?**
Yes. Tell us your waste type and weekly volume, or send a sample, and we will suggest a model.


## Briquette machine FAQs

> Most briquette machines need a dry waste stream (15% moisture or less), a 3-phase supply (16A for most Falach models, 32A for the largest) and a floor area of 1250 × 740 mm to 2220 × 1200 mm. The answers below cover the rest.

- URL: https://briquette-machines.co.uk/faqs/
- Updated: 18 November 2026

## Space, power and noise

Model |
Supply |
Size (L × W × H) |
Weight |
Noise |

[Falach 20](/machines/falach-20-briquette-machine/) |
3-phase, 16A (single-phase version available) |
1250 × 740 × 1120 mm |
233 kg |
68 dB |

[Falach 20XL](/machines/falach-20xl-briquette-machine/) |
3-phase, 16A (single-phase option available) |
1250 × 740 × 1450 mm |
233 kg |
68 dB |

[Falach 30](/machines/falach-30-briquette-machine/) |
3-phase, 16 amp |
1860 × 890 × 1100 mm |
400 kg |
68 dB |

[Falach 35](/machines/falach-35-briquette-machine/) |
3-phase, 16A |
1860 × 890 × 1100 mm |
400 kg |
68 dB |

[BrikStar EK 20](/machines/brikstar-ek-20/) |
400 V, three-phase |
Ask IWM |
~385 kg |
~75 dB |

[Falach 50](/machines/falach-50-briquette-machine/) |
3-phase, 16A |
1860 × 890 × 1100 mm |
390 kg |
68 dB |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
3-phase, 16A |
1960 × 1150 × 1350 mm |
430 kg |
68 dB |

[Falach 70](/machines/falach-70-briquette-machine/) |
3-phase, 32 amp |
2220 × 1200 × 1510 mm |
840 kg |
68 dB |

[Falach 100](/machines/falach-100-briquette-machine/) |
3-phase, 32 amp |
2220 × 1200 × 1510 mm |
810 kg |
62 dB (max, under load) |

The questions below run roughly in order: space and power, running and maintenance, your waste, the briquettes, and buying. If yours isn’t here, [ask IWM](/contact/).

## Where to read more

- [Buying guide](/buying-guide/): choosing output, power and features

- [Running costs](/running-costs/): electricity per tonne, with worked examples

- [Waste guides](/waste/): sawdust, shavings, chippings, MDF and moisture

- [Compare machines](/compare/) side by side

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**How much space does a briquette machine need?**
The Falach 20 and 20XL are the most compact at 1250 × 740 mm. The Falach 30, 35 and 50 are 1860 × 890 mm, the Falach 50XL is 1960 × 1150 mm, and the Falach 70 and 100 are 2220 × 1200 mm. Allow working room around the machine to load the hopper, change bags and service it.

**How tall are briquette machines?**
From 1100 mm (Falach 30, 35 and 50) and 1120 mm (Falach 20) up to 1510 mm (Falach 70 and 100). The Falach 20XL is 1450 mm and the 50XL 1350 mm. Check the height if the press sits under a cyclone, chute or extractor.

**How heavy are they? Do I need a special floor?**
The Falach 20 and 20XL weigh 233 kg, the Falach 30 and 35 400 kg, the Falach 50 390 kg and the 50XL 430 kg. The Falach 70 is 840 kg, the Falach 100 810 kg and the used Soukup 60–70 1270 kg. Check your floor loading, especially for the heavier machines.

**Do briquette machines need three-phase power?**
Most do. The Falach 20, 20XL, 30, 35, 50 and 50XL need 3-phase 16A. The Falach 70, Falach 100 and Soukup 60–70 need 3-phase 32A. The BrikStar EK 20 needs 400 V three-phase.

**Is there a single-phase briquette machine?**
Yes. The Falach 20 and Falach 20XL are available in single-phase versions. Both are rated 10–25 kg/hr.

**What is the difference between a 16A and a 32A supply?**
It is the current the circuit can safely carry. Smaller presses (Falach 20 to 50XL) run on 3-phase 16A. The Falach 70 and 100 have bigger motors (7.5 kW and 11 kW) and need 3-phase 32 amp. Ask your electrician to check the supply at the spot where the machine will go.

**How noisy is a briquette machine?**
Most Falach models list 68 dB, roughly the level of a normal conversation. The Falach 100 lists 62 dB (max, under load). The BrikStar EK 20 lists about 75 dB, so hearing protection is advisable for long periods close by. In most workshops the press is quieter than the machines making the waste.

**What maintenance does a briquette machine need?**
Keep the hopper and surroundings clear of build-up, watch the hydraulic oil level and condition, and have the machine serviced. The pressing parts wear over time. Most Falach models have a chromed piston and press chamber. Ask IWM for the service schedule for the model you choose. Servicing and parts come from our own team.

**How dry does my waste need to be?**
Dry. Falach presses list a maximum moisture content of 15%. The BrikStar EK 20 accepts up to about 15%, and works best below 12%. Above about 15% the briquettes tend to crumble rather than bind.

**What size of chip can go in?**
Fine waste works best. The Falach 50 lists a maximum chip size of 15 mm. Larger offcuts need to go through a shredder first.

**Can I briquette MDF dust?**
The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials. The press is only half of it. Burning MDF briquettes may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA, NRW or NIEA) and your local authority.

**Do I need to add glue or a binder?**
No. Wood contains lignin, a natural binder. Under the pressure of the press, and the heat that pressure creates, it softens and holds the briquette together.

**What can I do with the briquettes?**
Two things. Use them in a suitable stove, boiler or wood waste heater, instead of fossil heating. Or give them away to staff, neighbours or the community. Either way, less waste goes to skips and landfill. Check the rules first if your waste includes board or treated timber.

**Thinking of selling briquettes?**
Check first. Selling wood fuel to households in the UK has its own certification rules (Ready to Burn or Woodsure), and briquettes made from treated wood or board have extra rules. Check with your environmental regulator and local authority before offering any.

**How much heat is in a briquette?**
Dry wood briquettes typically hold around 4.5–5 kWh of energy per kg. How much useful heat you get depends on the stove or boiler.

**How should I store briquettes?**
Somewhere dry and under cover, off the floor if possible. Briquettes soak up moisture and will swell and break up if they get wet. Bagged briquettes are easier to stack and move.

**How do the briquettes get bagged?**
The simplest way is a single bag under the outlet. The Falach 20XL comes with a briquette chute and single bag stand. For more output, the Falach Five Bag Carousel fills five 20–25 kg bags in turn, driven by the press. The IWM Six Bag Carousel is top loading and made to fit most machines.

**How do I choose the right output?**
Weigh the waste you make in a week, then divide by the hours the press will run. 600 kg a week over 40 hours is 15 kg per hour, which suits a Falach 20 or 20XL. Allow some headroom for busy weeks.

**Can the press be fed straight from my dust extractor?**
Often, yes. Many presses are fed from an extractor, cyclone or silo. Plan the layout before you buy. The BrikStar EK 20 must not be connected to a pressurised extraction system or installed outdoors.

**Does someone need to stand over it?**
Not usually. Models with automatic switch-out (Falach 35, 50, 50XL, 70 and 100) stop when the hopper runs out. The BrikStar EK 20 also stops automatically when the hopper is empty. The Falach 30 has no automatic switch-out, so expect to supervise it more.

**How much does a briquette machine cost?**
New Falach presses run from £8,480 + VAT (Falach 20) to £24,980 + VAT (Falach 100). The BrikStar EK 20 is from £11,500 + VAT. Bag carousels are from £1,480 + VAT. Used machines are priced individually.

**Can I get finance?**
Yes, finance can be arranged. Ask about it when you request a quote.

**Do you deliver and install?**
We can deliver, install and train your operators. On some models, such as the Falach 100, installation and commissioning is charged separately. Lead time on models such as the Falach 35 and 100 is normally 4–6 weeks from order.

**Can I see a briquette machine working before I buy?**
Yes. Send us a sample of your waste or come and see a machine running, and we will confirm the details.

**Should I buy new or used?**
Used and ex-demo machines can cost less, but you get whatever sizes are in stock. Our reconditioned machines come with a 6 month parts warranty. A new machine lets you pick the exact size. Either way, size it to your waste.


## Briquette machine running costs

> The electricity to run a Falach briquette press is typically around 63–78 kWh per tonne of briquettes, based on each model's power use and the middle of its rated output. At an example price of 25p per kWh that is roughly £16–£20 per tonne. Compare that with what you pay now to have the same waste taken away.

- URL: https://briquette-machines.co.uk/running-costs/
- Updated: 18 November 2026

## How does the calculator work?

The calculator compares two things: what you pay now to get rid of your waste, and what the electricity costs to press the same waste into briquettes. You put in your own figures. Ours are examples only.

- **Your waste cost:** skips per month × cost per skip.

- **Your waste weight:** skip volume in m³ × how much a cubic metre of your waste weighs. Loose dry shavings are light, typically around 60–120 kg per m³. Sawdust is heavier, typically around 150–250 kg per m³. Weigh a full bag of yours if you can.

- **Press hours:** waste weight ÷ the press output in kg per hour.

- **Electricity:** press hours × the machine’s power use in kW × your price per kWh.

## Worked example 1: small workshop with a Falach 20

All inputs are example figures. Replace them with your own.

Input |
Example figure |

Skip size |
6-yard (about 4.6 m³) |

Skips per month |
2 |

Cost per skip |
£220 |

Weight of waste |
100 kg per m³ |

Electricity price |
25p per kWh |

Machine |
[Falach 20](/machines/falach-20-briquette-machine/): 1.1 kW, 10–25 kg/hr (we use the middle, 17.5 kg/hr) |

- Skip spend: 2 × £220 = **£440 a month**

- Waste: 2 × 4.6 m³ × 100 kg = 920 kg a month

- Press hours: 920 ÷ 17.5 = 52.6 hours

- Electricity: 52.6 × 1.1 kW = 57.8 kWh × £0.25 = **£14.46 a month**

## Worked example 2: busy joinery with a Falach 50

Input |
Example figure |

Skip size |
8-yard (about 6.1 m³) |

Skips per month |
4 |

Cost per skip |
£260 |

Weight of waste |
100 kg per m³ |

Electricity price |
25p per kWh |

Machine |
[Falach 50](/machines/falach-50-briquette-machine/): 3.8 kW, 40–60 kg/hour (we use 50 kg/hour) |

- Skip spend: 4 × £260 = **£1,040 a month**

- Waste: 4 × 6.1 m³ × 100 kg = 2,440 kg a month

- Press hours: 2,440 ÷ 50 = 48.8 hours

- Electricity: 48.8 × 3.8 kW = 185.4 kWh × £0.25 = **£46.36 a month**

## Electricity per tonne, by model

Our arithmetic from each machine’s published power use and the middle of its output range, at an example 25p per kWh. Real figures vary with your material.

Model |
Power use |
Output used |
Hours per tonne |
kWh per tonne |
Cost per tonne at 25p |

[Falach 20](/machines/falach-20-briquette-machine/) / [20XL](/machines/falach-20xl-briquette-machine/) |
1.1 kW |
17.5 kg/hr |
57.1 |
62.9 |
£15.71 |

[Falach 30](/machines/falach-30-briquette-machine/) |
2.2 kW |
30 kg/hour |
33.3 |
73.3 |
£18.33 |

[Falach 35](/machines/falach-35-briquette-machine/) |
2.2 kW |
35 kg/hour |
28.6 |
62.9 |
£15.71 |

[Falach 50](/machines/falach-50-briquette-machine/) / [50XL](/machines/falach-50xl-briquette-machine/) |
3.8 kW |
50 kg/hour |
20.0 |
76.0 |
£19.00 |

[Falach 70](/machines/falach-70-briquette-machine/) |
4.9 kW |
70 kg/hour |
14.3 |
70.0 |
£17.50 |

[Falach 100](/machines/falach-100-briquette-machine/) |
8.2 kW |
105 kg/hour |
9.5 |
78.1 |
£19.52 |

## What the calculator leaves out

Electricity is only part of the picture. Before you decide, add in:

- The price of the machine, or the monthly finance cost

- Bags or boxes for the briquettes (for example, replacement bags for the IWM Six Bag Carousel are £19.98 + VAT for 50, ex works Newark)

- Servicing and wear parts. Ask IWM for the model you’re looking at.

- Operator time to load the hopper and move bags

- Any skips you still need for offcuts, packaging and general waste

- Any permit or exemption costs if your waste includes MDF or treated timber

On the other side, the briquettes have value. Dry wood briquettes typically hold around 4.5–5 kWh of energy per kg, though how much useful heat you get depends on the appliance. You may burn them in a suitable heater or give them away. See [what to do with sawdust](/what-to-do-with-sawdust/).

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50 Briquette Machine](https://briquette-machines.co.uk/machines/falach-50-briquette-machine.md): 40–60 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**How much electricity does a briquette machine use?**
Each model has a published power use figure. The Falach 20 and 20XL use 1.1 kW, the Falach 30 and 35 use 2.2 kW, the Falach 50 and 50XL use 3.8 kW, the Falach 70 uses 4.9 kW and the Falach 100 uses 8.2 kW.

**How do I work out the cost per hour?**
Multiply the power use in kW by your price per kWh. At an example 25p per kWh, a Falach 50 at 3.8 kW costs 3.8 × £0.25 = £0.95 an hour.

**Will a briquette machine pay for itself?**
That depends on your waste volume, what you pay now and what you do with the briquettes. Use the calculator with your own figures and add the costs it leaves out. We won't promise how fast it pays back without knowing your numbers.

**How heavy is a skip of wood waste?**
It varies a lot. Loose dry shavings typically weigh around 60–120 kg per m³, so an 8-yard skip (about 6.1 m³) might hold only a few hundred kilos. Weigh a bag of your own waste for a better figure.

**Is the price per kWh in the calculator IWM's figure?**
No. 25p is an example. Use the unit rate on your own electricity bill.


## Wood waste guides

> Most dry wood waste can be pressed into briquettes, but the type matters. Dust and shavings press directly, chippings need to be under about 15 mm, MDF has extra rules, and anything over about 15% moisture needs drying first.

- URL: https://briquette-machines.co.uk/waste/
- Updated: 18 November 2026

## Which kind of waste do you have?

Waste |
Briquettes directly? |
Watch out for |
Guide |

Sawdust |
Usually yes, if dry |
Moisture, especially from sawmills |
[Sawdust](/waste/sawdust/) |

Planer and moulder shavings |
Yes |
Very light and bulky, so plan the hopper feed |
[Wood shavings](/waste/wood-shavings/) |

Chippings |
If small enough |
Chip size (the Falach 50 lists 15 mm max) |
[Wood chippings](/waste/wood-chippings/) |

MDF and board dust |
Several Falach models accept it |
Permits and rules on burning |
[MDF and board dust](/waste/mdf-and-board-dust/) |

Hardwood and softwood |
Both |
Mixes press differently |
[Hardwood vs softwood](/waste/hardwood-vs-softwood/) |

Wet or green waste |
Not until dried |
Over about 15% moisture won’t bind |
[Moisture content](/waste/moisture-content/) |

## Why does the type of waste matter?

A briquette press works by packing fine, dry material into a chamber under high pressure until the lignin in the wood binds it. Anything that gets in the way of that makes a weaker briquette. Water stops it binding. Large pieces don’t pack. Very light shavings can bridge in the hopper and starve the press. Board and treated timber press fine, but change what you’re allowed to do with the briquettes afterwards. Each guide below covers one of these in detail.

## Who makes which waste?

- [Joinery workshops](/for/joinery-workshops/): mostly shavings and dust, some MDF

- [Sawmills](/for/sawmills/): sawdust, often green and wet

- [Furniture makers](/for/furniture-makers/) and [shopfitters](/for/shopfitters/): fine dust and board waste

- [Pallet makers](/for/pallet-makers/): offcuts, chips and dust

## Start by measuring your waste

Weigh what you produce in a typical week and note what it is. Note what you pay now to have it taken away. That tells you whether a press makes sense and what size you need. Our [running costs calculator](/running-costs/) does the arithmetic.

## What about offcuts?

A briquette press takes fine material. Offcuts, pallets and board strips need a shredder first. IWM supplies shredders through [iwmachines.co.uk](https://www.iwmachines.co.uk/).

Not sure what yours will do? [Send us a sample](/book-a-trial/).

### Questions and answers

**What wood waste can be made into briquettes?**
Dry sawdust, shavings, small chippings and, on several Falach models, MDF dust. Offcuts need shredding first, and wet waste needs drying.

**Can mixed waste be briquetted?**
Usually, if it is dry and fine enough. A mix of dust and shavings often presses well. Send a sample if you are unsure.

**What waste can't go in a briquette press?**
Large offcuts, wet or green waste over about 15% moisture, and anything with metal, stones or plastic in it. Keep general rubbish out of the extraction.

**Do I need a shredder?**
Only if you have offcuts or chips larger than the press accepts. Shavings and dust go straight in.


## Sawdust briquettes

> Dry sawdust is one of the easiest wood wastes to briquette. A hydraulic press packs it into dense briquettes with no glue, as long as it is below about 15% moisture. Typically the volume falls several times over, and the briquettes can be burned in a suitable heater or given away.

- URL: https://briquette-machines.co.uk/waste/sawdust/
- Updated: 18 November 2026

## Can you make briquettes from sawdust?

Yes. Sawdust is fine, even and packs tightly, which is what a briquette press wants. A hydraulic ram pushes the sawdust into a chamber under high pressure. Lignin, the natural binder in wood, softens under that pressure and locks the particles together. Out comes a solid briquette. Nothing is added.

Every Falach press, and the BrikStar EK 20, lists sawdust or dust among its accepted materials.

## How dry does sawdust need to be?

This is the one that catches people out. Falach presses list a maximum moisture content of 15%. The BrikStar EK 20 works up to about 15% and best below 12%. Above about 15%, the steam and water stop the briquette binding, so it comes out soft or falls apart.

- **Joinery and furniture workshops** cutting kiln-dried timber usually produce sawdust dry enough to press.

- **Sawmills** cutting green logs produce sawdust that is often far too wet. It needs drying first.

- **Sawdust stored outside** picks up rain and needs checking.

A cheap moisture meter, or a sample sent to us, settles it. Read more in our [moisture content guide](/waste/moisture-content/).

## How much space does briquetting save?

Loose dry sawdust typically weighs around 150–250 kg per cubic metre. A finished briquette from a Falach 20, 20XL or 100 has a density of 900–1,100 kg/m³. Once stacked or bagged, with air gaps between them, the saving is less than that suggests, but the volume still typically falls several times over. For the BrikStar EK, IWM’s figure is that briquetting reduces waste volume by about eight times.

## What is a sawdust briquette worth as fuel?

Dry wood briquettes typically hold around 4.5–5 kWh of energy per kg. That is in the same range as good, dry firewood, but in a denser, more even form that stores and stacks well. How much useful heat you get depends on the stove, boiler or heater.

## Which machine for sawdust?

Choose on how much you make. Weigh a full extraction bag, count how many you fill a week, and divide the weekly total by the hours the press will run.

Model |
Output |
Power use |
Supply |
Briquette |
Price |

[Falach 20](/machines/falach-20-briquette-machine/) |
10–25 kg/hr |
1.1 kW |
3-phase, 16A (single-phase version available) |
30 × 30 × 30 mm cube |
From £8,480 + VAT |

[Falach 30](/machines/falach-30-briquette-machine/) |
25–35 kg/hour |
2.2 kW |
3-phase, 16 amp |
50 mm diameter |
From £9,980 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
50 mm diameter, 35–50 mm long |
From £10,980 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
50 mm diameter, 35–50 mm long (adjustable) |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
3-phase, 32 amp |
70 mm diameter, 40–60 mm long |
From £19,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
70 mm diameter, 45 mm long (adjustable) |
From £24,980 + VAT |

- A small workshop with a single extractor: [Falach 20](/machines/falach-20-briquette-machine/) or [Falach 20XL](/machines/falach-20xl-briquette-machine/). Single-phase versions are available.

- A steady joinery or furniture shop: [Falach 35](/machines/falach-35-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/).

- A sawmill or timber yard with dry sawdust in volume: [Falach 70](/machines/falach-70-briquette-machine/) or [Falach 100](/machines/falach-100-briquette-machine/).

## What are the other options for sawdust?

Skips and collections, giving it away for animal bedding, burning it loose, or selling it. Each has a place. We compare them honestly in [what to do with sawdust](/what-to-do-with-sawdust/).

## Is sawdust dangerous to store?

Fine wood dust is a fire risk and, in the air, an explosion risk. It is also a health hazard to breathe. Pressing it into briquettes means less loose dust lying around. Follow HSE guidance on wood dust and keep extraction well maintained.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**Do you need a binder to make sawdust briquettes?**
No. A hydraulic press uses pressure alone. Lignin in the wood softens and binds the briquette.

**Why are my sawdust briquettes crumbling?**
The usual cause is moisture. Above about 15% the briquettes don't bind properly. Particle size and very mixed material can also play a part.

**Can I briquette sawmill sawdust?**
Only once it is dry enough. Green sawdust is usually well over 15% moisture and needs drying first.

**How many kWh are in a kg of sawdust briquettes?**
Typically around 4.5–5 kWh per kg for dry wood briquettes. Useful heat depends on the appliance.

**What is the smallest press for sawdust?**
The Falach 20, rated 10–25 kg/hr, with a 1250 × 740 mm footprint and a single-phase version.


## Wood shavings briquettes

> Wood shavings press well into briquettes and give the biggest space saving of any wood waste, because loose shavings are so light and bulky. The main thing to plan is the hopper, since a cubic metre of shavings weighs very little.

- URL: https://briquette-machines.co.uk/waste/wood-shavings/
- Updated: 18 November 2026

## Can wood shavings be made into briquettes?

Yes. Planer, thicknesser and moulder shavings are exactly what most workshop briquette presses are built for. Every Falach press lists shavings among its accepted materials. As with any wood waste, they need to be dry. Shavings from kiln-dried timber usually are.

## Why shavings are expensive to get rid of

Loose dry shavings are mostly air. They typically weigh around 60–120 kg per cubic metre, depending on the timber and how fine they are. So a skip or a row of extraction bags fills up fast, and you pay to move a lot of volume and not much weight. A briquette from a Falach 20, 20XL or 100 has a density of 900–1,100 kg/m³. Even allowing for gaps in a bag, the volume typically falls many times over.

## How do I plan the hopper feed?

Because shavings are so light, a hopper of a given size holds fewer kilos of shavings than of sawdust. Two features help:

- **A bigger hopper.** The [Falach 20XL](/machines/falach-20xl-briquette-machine/) has a 0.75 m³ hopper on the same footprint as the Falach 20 (0.33 m³). The [Falach 50XL](/machines/falach-50xl-briquette-machine/) has 0.80 m³ against the Falach 50’s 0.33 m³. The [Falach 70](/machines/falach-70-briquette-machine/) and [Falach 100](/machines/falach-100-briquette-machine/) have 0.75 m³.

- **An agitator.** Light shavings can bridge in a hopper, forming an arch with a hollow under it. An auto reverse vertical agitator keeps them moving. The Falach 35, 50, 50XL, 70 and 100 have one. The 50XL also has a vibration unit.

If your extractor or cyclone discharges straight into the hopper, the press can keep up with the waste as it is made. If you load by hand from bags, a bigger hopper means fewer trips.

Model |
Output |
Hopper |
Supply |
Price |

[Falach 20](/machines/falach-20-briquette-machine/) |
10–25 kg/hr |
0.33 m³ |
3-phase, 16A (single-phase version available) |
From £8,480 + VAT |

[Falach 20XL](/machines/falach-20xl-briquette-machine/) |
10–25 kg/hr |
0.75 m³ |
3-phase, 16A (single-phase option available) |
From £8,980 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
0.33 m³ |
3-phase, 16A |
From £10,980 + VAT |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
0.33 m³ |
3-phase, 16A |
From £12,480 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
0.80 m³ |
3-phase, 16A |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
0.75 m³ |
3-phase, 32 amp |
From £19,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
0.75 m³ |
3-phase, 32 amp |
From £24,980 + VAT |

## Which press for shavings?

- **A few bags a day:** [Falach 20XL](/machines/falach-20xl-briquette-machine/). 10–25 kg/hr, compact, with a big hopper and a single-phase option.

- **A busy joinery:** [Falach 35](/machines/falach-35-briquette-machine/) (30–40 kg/hour) or [Falach 50XL](/machines/falach-50xl-briquette-machine/) (40–60 kg/hour, 0.80 m³ hopper).

- **A moulding or planing line running all day:** [Falach 70](/machines/falach-70-briquette-machine/) or [Falach 100](/machines/falach-100-briquette-machine/).

## What about shavings for animal bedding?

Clean, dust-free softwood shavings are popular for bedding horses and small animals. If you have a reliable local taker, it can be a good outlet. Bedding buyers usually want clean, dry, untreated shavings and may not want hardwood or fine dust. Read the full comparison in [what to do with sawdust](/what-to-do-with-sawdust/).

## Are shaving briquettes as good as sawdust briquettes?

Both make good briquettes when dry. A mix of shavings and dust often presses well, because the fine dust fills the gaps between the flakes. If you are unsure how your own mix will behave, [send us a sample](/book-a-trial/).

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-20xl-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**How much space do I save briquetting shavings?**
Typically a lot. Loose dry shavings weigh around 60–120 kg per m³, while a Falach briquette is around 900–1,100 kg/m³. Bagged briquettes have gaps, but the volume still typically falls many times over.

**Which Falach has the biggest hopper?**
The Falach 50XL at 0.80 m³. The Falach 20XL, 70 and 100 have 0.75 m³.

**Why do shavings get stuck in the hopper?**
Light shavings can bridge, forming an arch over the feed. An auto reverse vertical agitator, fitted to the Falach 35, 50, 50XL, 70 and 100, keeps them moving.

**Can I connect my extractor straight to the press?**
Often, yes. Plan the layout first. The BrikStar EK 20 must not be connected to a pressurised extraction system.


## Wood chippings briquettes

> Small, dry wood chippings can be briquetted, usually mixed with dust and shavings. The Falach 50 lists a maximum chip size of 15 mm, so larger chips, offcuts and pallet wood need to go through a shredder first.

- URL: https://briquette-machines.co.uk/waste/wood-chippings/
- Updated: 18 November 2026

## Can wood chips go in a briquette press?

Yes, if they are small and dry. The Falach 30, 35, 50, 50XL and 100 list chippings among their accepted materials, and the BrikStar EK 20 accepts dry wood chips. What matters is size. The Falach 50 gives a maximum chip size of 15 mm, and IWM’s material guide for the BrikStar EK asks for pieces smaller than 15 mm. Use 15 mm as a working limit and check the model you’re looking at.

## Why does chip size matter?

The press works by packing material into a small chamber. Large, hard pieces don’t pack tightly, can jam the feed and wear the press faster. Fine material fills the spaces and binds well. That is why a mix of chips, shavings and dust often presses better than chips on their own.

## What about offcuts and pallets?

Offcuts, board strips, broken pallets and other solid pieces can’t go into a briquette press as they are. They need shredding first. A shredder turns them into chips small enough to feed the press. IWM supplies industrial shredders through [iwmachines.co.uk](https://www.iwmachines.co.uk/), so we can look at the shredder and press together.

One of our customers, First Grade Projects, a maker of bespoke furniture and cubicle systems, did just this. With support from Rhondda Cynon Taf County Borough Council and the Shared Prosperity Fund Business Growth Grant, they installed an industrial wood shredder and a briquette press. Waste is shredded, then fed to the press, and the briquettes are used for heating. They report recycling over 90% of raw material waste that would previously have gone to skips.

## Shredder plus press: what to check

- **Output match.** The shredder and press should handle similar kilos per hour, or you’ll need a buffer store between them.

- **Metal.** Nails, staples and screws in pallets and site waste can damage a shredder and press. Plan how you’ll keep metal out.

- **Board and treated timber.** Pallets, painted wood and board are not virgin wood. That affects what you can do with the briquettes. See the rules below.

- **Moisture.** Pallet wood and outdoor offcuts are often not dry. Check before pressing.

## Which press for chippings?

Model |
Output |
Power use |
Supply |
Hopper |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
0.33 m³ |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
0.33 m³ |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
0.80 m³ |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
3-phase, 32 amp |
0.75 m³ |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
0.75 m³ |

- For mixed workshop waste with some chips: [Falach 35](/machines/falach-35-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/).

- For a shredder line producing a lot of chip: [Falach 70](/machines/falach-70-briquette-machine/) or [Falach 100](/machines/falach-100-briquette-machine/), both with 0.75 m³ hoppers.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**What is the maximum chip size for a briquette press?**
The Falach 50 lists 15 mm. IWM's guide for the BrikStar EK asks for pieces smaller than 15 mm. Check the model you choose.

**Can I briquette offcuts?**
Not directly. Shred them first into small chips, then press them, ideally mixed with dust and shavings.

**Can I briquette pallet wood?**
Once shredded and dry, it can be pressed. Remove metal first, and remember pallet wood may not count as virgin wood for burning.

**Do chips make good briquettes on their own?**
They press better mixed with finer dust and shavings, which fill the gaps. Send a sample to see how yours behave.


## MDF and board dust briquettes

> Yes, MDF and board dust can be briquetted, and several Falach presses list MDF among their accepted materials. The harder question is what you do with the briquettes. Burning briquettes made from MDF, chipboard or laminate may need an environmental permit or exemption, so check with your regulator first.

- URL: https://briquette-machines.co.uk/waste/mdf-and-board-dust/
- Updated: 18 November 2026

## Can a briquette press handle MDF dust?

Yes. MDF dust is very fine and dry, so it packs tightly. These Falach models list MDF in their accepted materials:

Model |
Output |
Power use |
Supply |
Price |

[Falach 30](/machines/falach-30-briquette-machine/) |
25–35 kg/hour |
2.2 kW |
3-phase, 16 amp |
From £9,980 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
From £10,980 + VAT |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
From £12,480 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
From £13,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
From £24,980 + VAT |

The [Falach 70](/machines/falach-70-briquette-machine/) is a different case. It is described for virgin wood, and its briquette listing reads “UK Clean Air Strategy compliant (virgin wood only)”. If your waste includes board, talk to us before choosing the Falach 70.

## Why is MDF different from solid wood?

MDF, chipboard and other boards are made from wood fibres or particles bonded with resin. Laminates and melamine-faced boards add a plastic or paper surface. Painted, varnished and preservative-treated timber has coatings or chemicals in it. All of these are still classed as waste wood, but not as clean, virgin wood. That changes what you can do with them once they are briquetted.

## Can you burn MDF briquettes?

Possibly, but it depends on the rules for your site, the appliance and the material. In general:

- Burning waste wood, including board, may need an environmental permit or a registered exemption.

- Smoke control areas have their own rules on which fuels and appliances are allowed.

- Your insurer may want to know.

We can’t tell you what applies to your site. Check with the Environment Agency in England, SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland, and with your local authority.

## Thinking of selling MDF briquettes? Check first

Be careful. Selling wood fuel to households in the UK may fall under Ready to Burn or Woodsure rules, which are designed around clean wood fuel. Briquettes made from board or treated timber have extra rules on top. Before offering any, ask your regulator and local authority. Keeping clean solid-wood waste separate from board waste at the extraction stage gives you cleaner briquettes.

## Can I keep MDF and solid wood separate?

Often. If certain machines cut only board and others cut only solid timber, separate extraction or bagging can give you two streams: clean wood briquettes you have more freedom with, and board briquettes you deal with under the rules that apply. Talk to us about the layout.

## Is briquetting MDF still worth it?

For many workshops, yes. Even if you can’t burn board briquettes yourself, a dense briquette takes up much less room than loose dust, so it’s cheaper to store and to have collected. Loose MDF dust is also a fine, airborne nuisance. Pressing it means less lying around. Work out the numbers with our [running costs calculator](/running-costs/).

## What about shopfitters and furniture makers?

These trades often work mostly in board. See our pages for [shopfitters](/for/shopfitters/) and [furniture makers](/for/furniture-makers/).

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 30 Briquette Machine](https://briquette-machines.co.uk/machines/falach-30-briquette-machine.md): 25–35 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50 Briquette Machine](https://briquette-machines.co.uk/machines/falach-50-briquette-machine.md): 40–60 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h

### Questions and answers

**Which briquette machines accept MDF?**
The Falach 30, 35, 50, 50XL and 100 list MDF in their accepted materials. The Falach 70 is described for virgin wood.

**Can I burn MDF briquettes in my workshop?**
It may need an environmental permit or a registered exemption, and smoke control rules may apply. Check with the Environment Agency (or SEPA, NRW or NIEA) and your local authority first.

**Thinking of selling MDF briquettes?**
Check first. Selling fuel may fall under Ready to Burn or Woodsure rules, and board briquettes have extra rules. Check with your regulator and local authority before offering any.

**Is briquetting MDF worth it if I can't burn it?**
Often yes, because the briquettes take far less space than loose dust and are easier to store and have collected.

**Does IWM decide what I can burn?**
No. We can talk the options through, but the decision rests with your regulator and local authority.


## Hardwood vs softwood briquettes

> Both hardwood and softwood waste make good briquettes as long as they are dry. Per kg, dry hardwood and softwood hold broadly similar energy. The bigger differences are in how the waste packs, how heavy the briquettes are, and how fast a press gets through it.

- URL: https://briquette-machines.co.uk/waste/hardwood-vs-softwood/
- Updated: 18 November 2026

## Does hardwood or softwood make better briquettes?

Neither is better across the board. Dry wood of any species typically holds around 4.5–5 kWh of energy per kg. What differs is the density. A cubic metre of oak weighs more than a cubic metre of pine, so a bag of hardwood briquettes tends to be heavier than the same bag of softwood ones. IWM’s carousel figures note that denser hardwood briquettes typically reach the upper end of a 20–25 kg bag.

## How do they press?

|
Softwood (pine, spruce, redwood) |
Hardwood (oak, ash, beech, sapele) |

Typical waste |
Light, bulky planer shavings |
Finer dust and smaller shavings |

Loose bulk |
Very light, fills bags fast |
Usually heavier per bag |

Pressing |
Packs well when dry |
Packs well, briquettes tend to be heavier |

Hopper |
Bridging more likely, an agitator helps |
Finer dust tends to flow more easily |

Energy per kg (dry) |
Broadly similar, typically around 4.5–5 kWh per kg |

These are general tendencies, not rules. Particle size and moisture matter more than species. A sample trial is the best way to see how your own mix behaves.

## Does output change with the wood?

Yes, a little. Each press’s output is a range for a reason. The BrikStar EK 20 notes that drier, finer material sits towards the higher end of its range. Heavier, finer waste tends to give more kilos per hour than very light, coarse shavings. When you size a press, use the middle of its range rather than the top.

## What about mixed waste?

Most joinery shops cut both, so their waste is a mix. That is normally fine. A blend of fine hardwood dust and softwood shavings often presses well, because the dust fills the gaps. Problems come from very uneven mixes, such as long thin shavings with large chips, or from wet timber mixed in with dry.

## Which machines suit which?

- **Mostly softwood shavings:** choose a model with a bigger hopper or an agitator, such as the [Falach 20XL](/machines/falach-20xl-briquette-machine/), [Falach 35](/machines/falach-35-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/).

- **Mostly hardwood dust:** a smaller hopper is less of a problem. The [Falach 30](/machines/falach-30-briquette-machine/) or [Falach 50](/machines/falach-50-briquette-machine/) suit steady volumes.

- **Large volumes of either:** [Falach 70](/machines/falach-70-briquette-machine/) or [Falach 100](/machines/falach-100-briquette-machine/).

## Thinking of selling briquettes? Check first

Whatever the species, wood fuel sold to households may fall under Ready to Burn or Woodsure rules. Check with your regulator and local authority before offering any.

## What about exotic and treated timbers?

Some exotic hardwoods produce dust that is an irritant or sensitiser to breathe, so follow HSE guidance on wood dust when handling them. Preservative-treated or painted timber is no longer clean wood, whatever the species. See [MDF and board dust](/waste/mdf-and-board-dust/).

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-20xl-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h

### Questions and answers

**Do hardwood briquettes burn hotter than softwood?**
Per kg, dry hardwood and softwood hold broadly similar energy, typically around 4.5–5 kWh per kg. Hardwood briquettes are often denser, so a bag weighs more.

**Can I mix hardwood and softwood waste?**
Yes. Mixed waste usually presses well, as long as it is dry.

**Do softwood shavings need a special press?**
No, but a bigger hopper or an agitator helps with light, bulky shavings. The Falach 20XL, 35 and 50XL are good examples.

**Does wood species affect press output?**
Somewhat. Output is a range because material varies. Drier, finer material tends to sit towards the top of the range.


## Moisture content for briquetting

> Wood waste needs to be below about 15% moisture to press into solid briquettes. Falach presses list a maximum of 15%, and the BrikStar EK 20 works best below 12%. Waste from kiln-dried timber is usually dry enough. Green sawmill waste usually is not.

- URL: https://briquette-machines.co.uk/waste/moisture-content/
- Updated: 18 November 2026

## Why does moisture matter so much?

A hydraulic briquette press relies on pressure, and the heat that pressure creates, to soften the lignin in wood so it binds. Too much water gets in the way. The briquette comes out soft, splits or crumbles, and the press works harder for a poorer result. IWM’s guidance for the BrikStar EK gives a range of 8% to 15%, so very dry material is worth testing too.

## What the machines say

Machine |
Moisture limit (as published) |

[Falach 20](/machines/falach-20-briquette-machine/) and [Falach 20XL](/machines/falach-20xl-briquette-machine/) |
15% maximum |

[Falach 50](/machines/falach-50-briquette-machine/) |
15% maximum |

[Falach 100](/machines/falach-100-briquette-machine/) |
15% maximum |

[BrikStar EK 20](/machines/brikstar-ek-20/) |
Up to ~15% by weight, optimal below 12% |

Treat 15% as the ceiling across the Falach range, and aim lower if you can.

## Is my waste dry enough?

Source |
Usually dry enough? |

Joinery, furniture and shopfitting using kiln-dried timber and board |
Usually yes |

MDF and board dust |
Usually yes |

Timber merchant cutting service (kiln-dried stock) |
Usually yes |

Sawmill cutting green logs |
Usually no, needs drying |

Air-dried or outdoor-stored timber |
Check it |

Pallet wood |
Check it, often variable |

Any waste stored outside or in an open skip |
Check it |

Kiln-dried joinery timber is typically dried to somewhere around 8–12% moisture, so its waste usually suits a press. Freshly felled timber is often well above 30%.

## How do I measure moisture content?

- **A moisture meter.** Pin-type meters work on solid wood. For dust and shavings, use a meter made for loose material, or the oven-dry method below.

- **The oven-dry method.** Weigh a sample, dry it in a low oven until its weight stops falling, and weigh it again. Moisture content (wet basis) = (wet weight − dry weight) ÷ wet weight × 100.

- **Send us a sample.** A [briquetting trial](/book-a-trial/) shows how your waste actually presses.

**Example:** a 500 g sample of sawdust weighs 420 g once dried. (500 − 420) ÷ 500 × 100 = 16%. Just over the limit, so it would need some drying.

## What if my waste is too wet?

- **Store it dry.** Keep extraction bags and silos under cover. Damp storage is the most common cause of wet waste in workshops.

- **Separate wet and dry streams.** If only one machine cuts wet timber, keep its waste apart.

- **Dry it.** Sawmills usually need a drying stage before a press. Talk to us about volumes.

## Do briquettes pick up moisture after pressing?

Yes. Dry briquettes are absorbent. If they get wet they swell and break up. Store them indoors, off the floor and away from damp walls. Bagged briquettes are easier to keep dry.

## Thinking of selling briquettes? Check first

Wood fuel sold to households in the UK may fall under Ready to Burn or Woodsure rules, which include moisture limits. Check the current requirements before offering any.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 50 Briquette Machine](https://briquette-machines.co.uk/machines/falach-50-briquette-machine.md): 40–60 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h
- [BrikStar EK 20](https://briquette-machines.co.uk/machines/brikstar-ek-20.md): 10–30 kg/h

### Questions and answers

**What moisture content is needed for briquettes?**
Below about 15%. Falach presses list 15% as the maximum. The BrikStar EK 20 accepts up to about 15% and works best below 12%.

**Why are my briquettes falling apart?**
Moisture is the most common reason. Above about 15% the briquettes don't bind. Very coarse or uneven material can also be a factor.

**Can I briquette green sawdust?**
Not as it comes. Green sawdust is usually well over 15% moisture and needs drying first.

**How do I measure moisture in sawdust?**
Weigh a sample, dry it in a low oven until the weight stops falling, then reweigh. (Wet − dry) ÷ wet × 100 gives moisture content.

**How should I store briquettes?**
Indoors, dry and off the floor. Wet briquettes swell and break up.


## Briquette machines by trade

> Any business that makes a steady stream of dry wood waste can use a briquette machine. What changes from trade to trade is the volume, the type of waste, how dry it is, and whether you want to burn the briquettes in a suitable heater or give them away.

- URL: https://briquette-machines.co.uk/for/
- Updated: 18 November 2026

## Find your trade

Trade |
Typical waste |
Main thing to check |
Models to look at |

[Joinery workshops](/for/joinery-workshops/) |
Shavings, dust, some MDF |
Weekly volume |
Falach 20 to 50XL |

[Sawmills](/for/sawmills/) |
Sawdust, often green |
Moisture |
Falach 70, 100 |

[Pallet makers](/for/pallet-makers/) |
Offcuts, chips, dust |
Shredding and metal |
Falach 50XL, 70 |

[Timber merchants](/for/timber-merchants/) |
Cutting service sawdust and shavings |
Fuel rules |
Falach 35, 50XL, 70 |

[Furniture makers](/for/furniture-makers/) |
Fine dust, MDF, hardwood |
Board rules |
Falach 30, 35, 50 |

[Shopfitters](/for/shopfitters/) |
Mostly board dust |
Board rules |
Falach 30, 35, 50XL |

[Biomass and wood fuel](/for/biomass-and-wood-fuel/) |
Clean sawdust and shavings |
Fuel rules and bagging |
Falach 70, 100 |

## What changes from one trade to another?

- **Volume.** A one-man joinery shop might need 10–25 kg per hour. A sawmill or fuel producer might need 90–120 kg per hour. That decides the model more than anything else.

- **Moisture.** Waste from kiln-dried timber and board is usually dry enough. Green sawmill sawdust and outdoor-stored pallet wood often are not. Falach presses list a maximum of 15%.

- **Board and treated timber.** Furniture makers and shopfitters often make mostly MDF and chipboard dust. Several Falach models accept it, but the rules on burning the briquettes are stricter.

- **Offcuts.** Pallet makers and shopfitters often need a shredder before the press.

- **What happens to the briquettes.** Some trades burn them on site and some give them away. Anyone thinking of selling them needs to check the fuel rules first.

## Whatever your trade

Start by weighing your weekly waste and noting what you pay to get rid of it. Then compare models on [output and power](/compare/) and run the numbers in our [running costs calculator](/running-costs/). Or [send us a sample](/book-a-trial/).

### Questions and answers

**Is a briquette machine only for joinery firms?**
No. Sawmills, pallet makers, timber merchants, furniture makers, shopfitters and wood fuel producers all make waste that can be briquetted.

**What is the smallest business a briquette machine suits?**
A workshop with a steady flow of dry waste. The Falach 20 is rated 10–25 kg/hr and has a single-phase version.

**What is the biggest machine you offer?**
The Falach 100, rated 90–120 kg/hour on 3-phase 32 amp.

**Can you help me choose for my trade?**
Yes. Tell us what you make and how much waste you produce, or send a sample.


## Briquette machines for joinery workshops

> For most joinery workshops, a Falach press in the 10–60 kg per hour range turns planer shavings and dust into briquettes as fast as the shop makes them. Joinery waste is usually from kiln-dried timber, so it is normally dry enough to press without drying.

- URL: https://briquette-machines.co.uk/for/joinery-workshops/
- Updated: 18 November 2026

## Why joinery waste suits briquetting

A joinery shop’s planers, moulders, spindles, saws and CNC routers send a constant flow of shavings and dust to the extractor. It’s dry, because the timber is kiln-dried. It’s light and bulky, so it fills bags and skips fast. And it keeps coming, every working day. Those are exactly the conditions where a briquette press earns its place.

## What size press does a joinery workshop need?

Weigh a full extraction bag, count how many you fill a week, and divide the weekly total by the hours the press will run. Most presses run alongside your machines through the day.

Weekly waste (example) |
Over 40 hours |
Models that fit |

400–800 kg |
10–20 kg/hr |
[Falach 20](/machines/falach-20-briquette-machine/), [Falach 20XL](/machines/falach-20xl-briquette-machine/) |

1,000–1,400 kg |
25–35 kg/hr |
[Falach 30](/machines/falach-30-briquette-machine/), [Falach 35](/machines/falach-35-briquette-machine/) |

1,600–2,400 kg |
40–60 kg/hr |
[Falach 50](/machines/falach-50-briquette-machine/), [Falach 50XL](/machines/falach-50xl-briquette-machine/) |

2,400–3,200 kg |
60–80 kg/hr |
[Falach 70](/machines/falach-70-briquette-machine/) |

The weekly figures are examples to show the method. Use your own.

Model |
Output |
Power use |
Supply |
Size (L × W × H) |
Price |

[Falach 20](/machines/falach-20-briquette-machine/) |
10–25 kg/hr |
1.1 kW |
3-phase, 16A (single-phase version available) |
1250 × 740 × 1120 mm |
From £8,480 + VAT |

[Falach 20XL](/machines/falach-20xl-briquette-machine/) |
10–25 kg/hr |
1.1 kW |
3-phase, 16A (single-phase option available) |
1250 × 740 × 1450 mm |
From £8,980 + VAT |

[Falach 30](/machines/falach-30-briquette-machine/) |
25–35 kg/hour |
2.2 kW |
3-phase, 16 amp |
1860 × 890 × 1100 mm |
From £9,980 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
1860 × 890 × 1100 mm |
From £10,980 + VAT |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
1860 × 890 × 1100 mm |
From £12,480 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
1960 × 1150 × 1350 mm |
From £13,980 + VAT |

## Small workshop or one-man band?

The [Falach 20](/machines/falach-20-briquette-machine/) and [Falach 20XL](/machines/falach-20xl-briquette-machine/) are the place to start. They share a 1250 × 740 mm footprint, use 1.1 kW and come in single-phase versions. The 20XL is taller (1450 mm against 1120 mm) with a 0.75 m³ hopper, so you fill it less often. Both make 30 mm cube briquettes.

Richard Findley of The Turners Workshop bought a briquette machine from us and was kind enough to post a review of it on Instagram, explaining what he had bought and how it helped him.

## Busy production joinery?

A shop making windows, doors and staircases with a moulder running most of the day usually needs 30–60 kg per hour. The [Falach 35](/machines/falach-35-briquette-machine/) adds an auto reverse agitator and automatic switch-out to the Falach 30. The [Falach 50XL](/machines/falach-50xl-briquette-machine/) has a 0.80 m³ hopper, an oil cooler and a vibration unit for long, steady runs on a 16A supply.

## Do joiners use MDF?

Many do, for panels, linings and jigs. The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials. Burning briquettes made with MDF has its own rules. See [MDF and board dust](/waste/mdf-and-board-dust/). If most of your waste is solid timber, keeping board dust separate gives you cleaner briquettes.

## What do joiners do with the briquettes?

- **Heat the workshop** in a suitable stove or wood waste heater. Quality Pods Wales, a maker of bespoke glamping pods, makes briquettes from its wood waste in one of our machines and uses them to heat its facilities with wood waste heaters.

- **Give them away** to staff, customers or neighbours.

## Linking the press to your extraction

Many presses can be fed from an extractor, cyclone or silo, so waste flows straight into the hopper. Plan the route, the height of the discharge and where the bags will go. Talk to us before you buy. IWM supplies dust extractors too, through [iwmachines.co.uk](https://www.iwmachines.co.uk/).

## Will it pay?

That depends on your waste and what you pay now. Our [running costs page](/running-costs/) shows how to work it out, with the arithmetic for a busy joinery on a Falach 50 using example figures.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 20XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-20xl-briquette-machine.md): 10–25 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h

### Questions and answers

**What is the best briquette machine for a small joinery?**
The Falach 20 or 20XL, rated 10–25 kg/hr, with a 1250 × 740 mm footprint and single-phase versions available.

**Can I run a briquette press on single-phase in my workshop?**
Yes, with the single-phase versions of the Falach 20 or 20XL. Larger Falach models need 3-phase.

**Is joinery waste dry enough to briquette?**
Usually, because it comes from kiln-dried timber. Falach presses list a maximum moisture content of 15%.

**Will a briquette press keep up with my moulder?**
Size it to your weekly waste and running hours. A busy moulding shop often needs 30–60 kg per hour, the Falach 35 to 50XL range.

**Can the press sit next to my extractor?**
Usually, yes. Many presses are fed directly from an extractor or cyclone. Plan the layout with us first.


## Briquette machines for sawmills

> A sawmill can briquette its sawdust, but only once it is dry. Green sawdust is usually far above the 15% moisture limit of a Falach press, so most mills need a drying stage first. For dry sawdust in volume, the Falach 70 (60–80 kg/hour) and Falach 100 (90–120 kg/hour) are the models to look at.

- URL: https://briquette-machines.co.uk/for/sawmills/
- Updated: 18 November 2026

## Can sawmill sawdust be made into briquettes?

Yes, if it is dry enough. Here is the honest picture. Freshly felled timber is often well above 30% moisture, and its sawdust is just as wet. Falach presses list a maximum moisture content of 15%. Wet sawdust won’t bind. It comes out of the press soft or crumbles.

So the first question for any sawmill isn’t which press. It’s how dry your sawdust is.

## Which sawmill waste is dry enough?

- **Waste from re-sawing or machining kiln-dried stock** is usually dry enough to press directly.

- **Waste from a kiln-dried planing or moulding line** on site is usually fine.

- **Green sawdust from the headrig or breakdown saws** usually needs drying first.

- **Sawdust stored in open heaps** picks up rain. Check it.

Many mills have both: wet sawdust from breaking down logs, and dry shavings and dust from processing kiln-dried timber. Separating the two streams means you can briquette the dry one now. Read our [moisture content guide](/waste/moisture-content/) for how to measure it.

## What output does a sawmill need?

Usually more than a workshop. Work it out the same way: weekly dry waste in kg, divided by the hours the press runs.

Model |
Output |
Power use |
Motor |
Supply |
Hopper |
Weight |
Price |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
5.5 kW |
3-phase, 16A |
0.80 m³ |
430 kg |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
7.5 kW |
3-phase, 32 amp |
0.75 m³ |
840 kg |
From £19,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
11 kW |
3-phase, 32 amp |
0.75 m³ |
810 kg |
From £24,980 + VAT |

[Soukup 60–70 (used)](/machines/soukup-briquette-machine-60-70/) |
60–70 kg/hour |
Ask IWM |
7.5 kW |
3-phase, 32A |
Ask IWM |
1270 kg |
From £12,500 + VAT |

**Example:** 4,000 kg of dry waste a week, with the press running 40 hours, needs 100 kg per hour. That points to the [Falach 100](/machines/falach-100-briquette-machine/). Run it for longer each day and the [Falach 70](/machines/falach-70-briquette-machine/) may do. These are example figures. Use your own.

## Falach 70 or Falach 100?

- The [Falach 70](/machines/falach-70-briquette-machine/) is rated 60–80 kg/hour, uses 4.9 kW and makes 70 mm briquettes, 40–60 mm long. It is listed as “UK Clean Air Strategy compliant (virgin wood only)”, which suits a mill cutting clean timber.

- The [Falach 100](/machines/falach-100-briquette-machine/) is rated 90–120 kg/hour, uses 8.2 kW and has an oil cooler for long runs. It lists 62 dB (max, under load).

Both need 3-phase 32 amp, share a 2220 × 1200 × 1510 mm frame and have a 0.75 m³ hopper. Both weigh over 800 kg, so check your floor.

## What about a used press?

We sometimes have higher-output used machines, such as a [reconditioned Falach 100](/machines/reconditioned-falach-100-briquette-machine/) or the used [Soukup 60–70](/machines/soukup-briquette-machine-60-70/). See [used briquette machines](/used-briquette-machines/).

## What do sawmills do with briquettes?

Burn them on site for drying or heating, or bag them and keep them dry until you need them. Thinking of selling any? Check the fuel rules first. See our page for [biomass and wood fuel producers](/for/biomass-and-wood-fuel/). Pair the press with a [Falach Five Bag Carousel](/machines/falach-five-bag-carousel-units/) (70 mm variant for the Falach 70 and 100) to bag as you go.

## Is briquetting right for every mill?

Not always. If you already sell wet sawdust for bedding, board making or biomass at a fair price, that may suit you better than drying and pressing. If you pay to get rid of it, or have dry waste going to skips, briquetting is worth a look.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h

### Questions and answers

**Can I briquette green sawdust?**
Not as it comes. Falach presses list a maximum moisture content of 15%. Green sawdust is usually far wetter and needs drying first.

**What is the largest briquette machine you sell?**
The Falach 100, rated 90–120 kg/hour, using 8.2 kW on 3-phase 32 amp.

**Which Falach suits a sawmill cutting clean timber?**
The Falach 70 (60–80 kg/hour) is listed as UK Clean Air Strategy compliant (virgin wood only). The Falach 100 suits higher volumes.

**How heavy are the large presses?**
The Falach 70 weighs 840 kg and the Falach 100 810 kg. The used Soukup 60–70 weighs 1270 kg.

**Can I trial my sawdust?**
Yes. Send a sample or come and see a machine running, and we'll confirm the details.


## Briquette machines for pallet makers

> Pallet waste can be briquetted, but most of it needs shredding first and the metal taken out. Once shredded to small chips and dry enough, it presses well in a Falach press. Remember that recycled or treated pallet wood may not count as clean virgin wood when you come to burn the briquettes.

- URL: https://briquette-machines.co.uk/for/pallet-makers/
- Updated: 18 November 2026

## What waste does a pallet business make?

- **New pallet makers:** sawdust from cross-cutting and ripping, offcuts and short ends, and chips from notching.

- **Pallet recyclers and repairers:** broken boards and blocks, often with nails, plus dust and splinters.

Only the dust and fine material goes straight into a briquette press. The rest needs shredding.

## Why does pallet waste need a shredder first?

A briquette press packs fine material into a small chamber. Large chips, offcuts and broken boards won’t feed or pack. The Falach 50 lists a maximum chip size of 15 mm. A shredder breaks pallet waste down to a size the press can take. IWM supplies shredders through [iwmachines.co.uk](https://www.iwmachines.co.uk/), so we can look at shredder and press as one system.

## What about nails and staples?

Metal is the biggest risk with pallet waste. It can damage a shredder and wear or damage a press. Plan how to take it out: sort by hand, choose a shredder built for it, and use a magnet after shredding. Ask us about what suits your volume.

## Is pallet waste dry enough?

Often not reliably. New pallets are frequently made from timber that isn’t kiln-dried, and recycled pallets may have been stored outside. Falach presses list a maximum moisture content of 15%. Check your waste, and store it under cover. See the [moisture content guide](/waste/moisture-content/).

## Which press suits a pallet business?

Model |
Output |
Power use |
Supply |
Hopper |
Price |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
0.33 m³ |
From £10,980 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
0.80 m³ |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
3-phase, 32 amp |
0.75 m³ |
From £19,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
0.75 m³ |
From £24,980 + VAT |

- A smaller pallet maker with steady dust and chip waste: [Falach 35](/machines/falach-35-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/).

- A high-volume yard with a shredder line: [Falach 70](/machines/falach-70-briquette-machine/) or [Falach 100](/machines/falach-100-briquette-machine/).

Match the shredder output to the press output, or plan a store between them so neither waits for the other.

## Can I burn pallet briquettes?

This needs care. Pallet wood may be treated, painted, contaminated or of unknown origin, especially in recycling. That may change what you can burn. Heat-treated pallet timber is a different thing from chemically treated timber, but you need to know which you have. Keep clean new-timber waste separate from mixed recycled waste where you can.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

## Is it worth it for a pallet yard?

If you pay to have offcuts and dust taken away, or your yard is cluttered with loose waste, a shredder and press can turn it into something compact and easier to handle. Work out the electricity side with our [running costs calculator](/running-costs/), then add the shredder.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h

### Questions and answers

**Can pallets be made into briquettes?**
Yes, once they are shredded to small chips, the metal is removed and the material is dry enough.

**Do nails damage a briquette machine?**
They can damage shredders and presses. Remove metal before pressing, for example with sorting and a magnet after shredding.

**Can I burn briquettes made from pallets?**
It depends on whether the wood is clean, treated or contaminated, and on the rules for your site. Check with your environmental regulator and local authority.

**Which press suits a pallet yard?**
For steady volumes, the Falach 50XL (40–60 kg/hour). For a high-volume shredder line, the Falach 70 or 100.


## Briquette machines for timber merchants

> A timber merchant with a cutting or machining service makes dry sawdust and shavings that briquette well. A Falach press turns that waste into compact briquettes you can burn to heat your own buildings in a suitable appliance, so less waste goes to skips and landfill. If you are thinking of selling any, check the fuel rules first.

- URL: https://briquette-machines.co.uk/for/timber-merchants/
- Updated: 18 November 2026

## What waste does a timber merchant make?

Most comes from the cutting and machining service: rip and cross-cut saws, panel saws, planers and moulders. It is usually from kiln-dried stock, so it’s normally dry enough to press. Some is board dust from cutting sheet materials, which needs keeping separate if you want clean wood briquettes.

## Why briquetting fits a merchant

- **Your waste is usually dry.** Waste from kiln-dried stock presses well.

- **Fewer skips.** Briquettes are far more compact than loose shavings, so less waste goes to skips and landfill.

- **You have yard space**, which matters for storage.

## What size press?

Weigh your weekly waste and divide by the hours the press will run.

Model |
Output |
Power use |
Supply |
Briquette |
Price |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
50 mm diameter, 35–50 mm long |
From £10,980 + VAT |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
50 mm diameter |
From £12,480 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
50 mm diameter, 35–50 mm long (adjustable) |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
3-phase, 32 amp |
70 mm diameter, 40–60 mm long |
From £19,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
70 mm diameter, 45 mm long (adjustable) |
From £24,980 + VAT |

- A merchant with a modest cutting service: [Falach 35](/machines/falach-35-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/).

- A merchant with a busy mill shop: [Falach 70](/machines/falach-70-briquette-machine/) or [Falach 100](/machines/falach-100-briquette-machine/), both making 70 mm briquettes.

## How do I bag the briquettes?

Carousel |
Bags |
Fits |
Power |
Price |

[Falach Five Bag Carousel Units](/machines/falach-five-bag-carousel-units/) |
5 × 20–25 kg |
Falach 30, 35, 50, 70 and 100 (50 mm and 70 mm variants) |
Driven by the press |
From £1,480 + VAT |

[IWM Six Bag Carousel Unit with Top Loading](/machines/iwm-six-bag-carousel-unit-with-top-loading/) |
6 × approx. 20–25 kg |
Made to fit most briquette machines |
None, mechanical |
From £1,680 + VAT |

With a Falach 50 running at 50 kg/hour, five bags of 20–25 kg (100–125 kg in all) fill in about 2 to 2.5 hours. Bags for the Five Bag Carousel come in boxes of 200 from IWM. Replacement bags for the Six Bag Carousel are £19.98 + VAT for 50, ex works Newark.

## What can I do with the briquettes?

You can burn the briquettes to heat your own buildings in a suitable appliance, or give them away. Even if you only want the waste gone, briquettes are far more compact than loose shavings.

## Thinking of selling briquettes? Check first

Selling wood fuel to households in the UK may fall under Ready to Burn or Woodsure rules, and these change over time. Briquettes containing board, MDF or treated timber have further rules. The [Falach 70](/machines/falach-70-briquette-machine/) is listed as “UK Clean Air Strategy compliant (virgin wood only)”. That wording applies to briquettes from virgin wood, so keep board waste out if you plan to sell. Check your plans with the Environment Agency (or SEPA, NRW or NIEA) and your local authority before you start.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h
- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h
- [Falach Five Bag Carousel Units](https://briquette-machines.co.uk/machines/falach-five-bag-carousel-units.md)

### Questions and answers

**What should a timber merchant check before selling briquettes?**
Selling wood fuel to households may fall under Ready to Burn or Woodsure rules, and board or treated waste has extra rules. Check with your regulator and local authority first.

**How do I bag briquettes automatically?**
Fit a bag carousel. The Falach Five Bag Carousel fills five 20–25 kg bags in turn, driven by the press. The IWM Six Bag Carousel is top loading and made to fit most machines.

**How long does it take to fill five bags?**
On a Falach 50 at 50 kg/hour, five 20–25 kg bags (100–125 kg) take about 2 to 2.5 hours.

**Should I keep board waste separate?**
Yes, if you want clean wood briquettes. Briquettes containing board or MDF have extra rules.


## Briquette machines for furniture makers

> Furniture makers usually produce fine, dry dust and shavings from hardwood and board, which press well into briquettes. A Falach 30, 35 or 50 suits most furniture workshops. If your waste includes MDF or chipboard, check the rules before burning the briquettes.

- URL: https://briquette-machines.co.uk/for/furniture-makers/
- Updated: 18 November 2026

## What waste does a furniture workshop make?

Sanding, routing and CNC work produce very fine dust. Planing and moulding produce shavings. Panel saws and edge banders add board dust. Most of it is dry, because both hardwood and board are kiln-dried or factory-made. That suits a briquette press well.

## Which press suits a furniture maker?

Model |
Output |
Power use |
Supply |
Size (L × W × H) |
Price |

[Falach 20](/machines/falach-20-briquette-machine/) |
10–25 kg/hr |
1.1 kW |
3-phase, 16A (single-phase version available) |
1250 × 740 × 1120 mm |
From £8,480 + VAT |

[Falach 30](/machines/falach-30-briquette-machine/) |
25–35 kg/hour |
2.2 kW |
3-phase, 16 amp |
1860 × 890 × 1100 mm |
From £9,980 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
1860 × 890 × 1100 mm |
From £10,980 + VAT |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
1860 × 890 × 1100 mm |
From £12,480 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
1960 × 1150 × 1350 mm |
From £13,980 + VAT |

- **A small cabinet or bespoke maker:** [Falach 20](/machines/falach-20-briquette-machine/) or [Falach 20XL](/machines/falach-20xl-briquette-machine/), with single-phase versions available.

- **A steady production workshop:** [Falach 30](/machines/falach-30-briquette-machine/) or [Falach 35](/machines/falach-35-briquette-machine/). The Falach 35 adds an agitator and automatic switch-out.

- **A furniture factory:** [Falach 50](/machines/falach-50-briquette-machine/) or [Falach 50XL](/machines/falach-50xl-briquette-machine/), both 40–60 kg/hour on 3-phase 16A.

## What about MDF, chipboard and veneered board?

The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials, so the press can handle it. The rules are the issue. Briquettes made from MDF, chipboard, laminate or lacquered material are not clean wood. Burning them may need an environmental permit or a registered exemption. Read our [MDF and board dust guide](/waste/mdf-and-board-dust/).

If you work in both solid hardwood and board, consider separate extraction or bagging for the two. Clean hardwood briquettes give you more options.

## A furniture maker who did it

First Grade Projects, a manufacturer of bespoke furniture and cubicle systems, used to send most of its raw material waste to skips and landfill. With support from Rhondda Cynon Taf County Borough Council through the Shared Prosperity Fund Business Growth Grant, it installed an industrial wood shredder and a briquette press. Waste is shredded, then pressed into briquettes used for heating. The company reports recycling over 90% of the raw material waste that previously went to skips, and the project supported a new job in the business.

## Is fine dust a problem for a press?

Fine dust usually presses well. It packs tightly. The things to watch are moisture (Falach presses list 15% maximum), very light material bridging in the hopper (an agitator helps), and keeping dust under control around the press. Follow HSE guidance on wood dust.

## What do furniture makers do with the briquettes?

- Heat the workshop in a suitable stove or wood waste heater

- Give them to staff and neighbours

- Store them compactly and have them collected, if you can’t use them

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 20 Briquette Machine](https://briquette-machines.co.uk/machines/falach-20-briquette-machine.md): 10–25 kg/h
- [Falach 30 Briquette Machine](https://briquette-machines.co.uk/machines/falach-30-briquette-machine.md): 25–35 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50 Briquette Machine](https://briquette-machines.co.uk/machines/falach-50-briquette-machine.md): 40–60 kg/h

### Questions and answers

**Can furniture workshop dust be briquetted?**
Yes. Fine, dry dust and shavings press well. Falach presses list a maximum moisture content of 15%.

**Can I briquette MDF and chipboard dust?**
The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials. Burning board briquettes has its own rules, so check first.

**Which press suits a small furniture maker?**
The Falach 20 or 20XL, rated 10–25 kg/hr, with single-phase versions available.

**Can I get help with funding?**
Some businesses have had grant support. First Grade Projects had support through the Shared Prosperity Fund Business Growth Grant via its local council. Ask your council what is available. Finance can also be arranged through IWM.


## Briquette machines for shopfitters

> A shopfitting workshop makes mostly board dust: MDF, chipboard, plywood and laminate. A Falach 30, 35 or 50XL can press it into compact briquettes, which cuts the volume you store and have collected. Because board isn't clean wood, check the rules before you burn the briquettes.

- URL: https://briquette-machines.co.uk/for/shopfitters/
- Updated: 18 November 2026

## What waste does a shopfitter make?

Panel saws, CNC routers and edge banders cutting MDF, chipboard, plywood, laminate and veneered board. The waste is dry and fine, often with a lot of very light dust. It fills bags fast and is a nuisance to handle loose.

## Can a briquette machine handle board dust?

Yes. These Falach models list MDF among their accepted materials:

Model |
Output |
Power use |
Supply |
Size (L × W × H) |
Price |

[Falach 30](/machines/falach-30-briquette-machine/) |
25–35 kg/hour |
2.2 kW |
3-phase, 16 amp |
1860 × 890 × 1100 mm |
From £9,980 + VAT |

[Falach 35](/machines/falach-35-briquette-machine/) |
30–40 kg/hour |
2.2 kW |
3-phase, 16A |
1860 × 890 × 1100 mm |
From £10,980 + VAT |

[Falach 50](/machines/falach-50-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
1860 × 890 × 1100 mm |
From £12,480 + VAT |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
1960 × 1150 × 1350 mm |
From £13,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
2220 × 1200 × 1510 mm |
From £24,980 + VAT |

The [Falach 70](/machines/falach-70-briquette-machine/) is described for virgin wood, so it is not the one to pick for a mainly board waste stream.

## What are the rules for board briquettes?

This is the part to get right. MDF, chipboard and laminate contain resins and surface materials, so they are not clean wood. In the UK, burning waste wood of this kind may need an environmental permit or a registered exemption, and selling it as fuel brings more rules. We can’t tell you what applies to your site. Ask the Environment Agency (or SEPA, NRW or NIEA) and your local authority.

Many shopfitters briquette board waste mainly to reduce its volume, then have the briquettes collected. A dense briquette takes far less room than loose dust.

## Which press suits a shopfitter?

- **A small shopfitting workshop:** [Falach 30](/machines/falach-30-briquette-machine/), 25–35 kg/hour on 3-phase 16 amp. It has no agitator or automatic switch-out, so expect to supervise it.

- **A busier shop with a CNC running most of the day:** [Falach 35](/machines/falach-35-briquette-machine/) (30–40 kg/hour) with an agitator and automatic switch-out.

- **A large shopfitting factory:** [Falach 50XL](/machines/falach-50xl-briquette-machine/), 40–60 kg/hour, with a 0.80 m³ hopper and a vibration unit for light dust.

## Shredding offcuts

Shopfitters also make board offcuts. These need a shredder before the press. First Grade Projects, a maker of bespoke furniture and cubicle systems, shreds its waste and then feeds it into a briquette press, and reports recycling over 90% of the raw material waste that previously went to skips. IWM supplies shredders through [iwmachines.co.uk](https://www.iwmachines.co.uk/).

## Is it worth it if I can’t burn the briquettes?

Possibly. Work out what you pay to move loose dust now, and compare it with the electricity to press it and the cost of having briquettes collected. Our [running costs page](/running-costs/) shows the method with example figures.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 30 Briquette Machine](https://briquette-machines.co.uk/machines/falach-30-briquette-machine.md): 25–35 kg/h
- [Falach 35 Briquette Machine](https://briquette-machines.co.uk/machines/falach-35-briquette-machine.md): 30–40 kg/h
- [Falach 50XL Briquette Machine](https://briquette-machines.co.uk/machines/falach-50xl-briquette-machine.md): 40–60 kg/h

### Questions and answers

**Can shopfitting board dust be briquetted?**
Yes. The Falach 30, 35, 50, 50XL and 100 list MDF among their accepted materials.

**Can I burn MDF and chipboard briquettes?**
Possibly not without a permit or exemption. Check with your environmental regulator and local authority first.

**Why briquette board dust if I can't burn it?**
To cut the volume. Briquettes are far more compact than loose dust, so they are easier to store and have collected.

**Which press suits a shopfitter with a CNC router?**
Often the Falach 35 (30–40 kg/hour) or the Falach 50XL (40–60 kg/hour), depending on your weekly volume.


## Briquette machines for biomass and wood fuel producers

> If you want to make wood briquettes in volume, you need a steady supply of clean, dry wood waste, a press with enough output, a way to bag the briquettes, and a clear view of the fuel rules before you offer any for sale. The Falach 70 (60–80 kg/hour) and Falach 100 (90–120 kg/hour) are the models built for that kind of volume.

- URL: https://briquette-machines.co.uk/for/biomass-and-wood-fuel/
- Updated: 18 November 2026

## What do you need to make briquettes in volume?

- **Raw material.** A reliable supply of clean, dry sawdust and shavings, ideally from virgin wood. Falach presses list a maximum moisture content of 15%.

- **Output.** A press sized to the tonnes you plan to make.

- **Bagging.** A carousel so bagging keeps pace with the press.

- **Storage.** Dry, covered space. Briquettes swell and break up if they get wet.

- **Compliance.** Selling fuel to households in the UK may fall under Ready to Burn or Woodsure rules.

## Which press for wood fuel production?

Model |
Output |
Power use |
Supply |
Briquette |
Hopper |
Price |

[Falach 50XL](/machines/falach-50xl-briquette-machine/) |
40–60 kg/hour |
3.8 kW |
3-phase, 16A |
50 mm diameter, 35–50 mm long (adjustable) |
0.80 m³ |
From £13,980 + VAT |

[Falach 70](/machines/falach-70-briquette-machine/) |
60–80 kg/hour |
4.9 kW |
3-phase, 32 amp |
70 mm diameter, 40–60 mm long |
0.75 m³ |
From £19,980 + VAT |

[Falach 100](/machines/falach-100-briquette-machine/) |
90–120 kg/hour |
8.2 kW |
3-phase, 32 amp |
70 mm diameter, 45 mm long (adjustable) |
0.75 m³ |
From £24,980 + VAT |

**Example:** to make 3 tonnes of briquettes a week on a Falach 100 at 105 kg/hour (the middle of its range) takes about 28.6 hours of pressing (3,000 ÷ 105). The electricity at 8.2 kW is about 234 kWh (28.6 × 8.2). At an example price of 25p per kWh that is about £58.57 a week. Use your own figures.

## Falach 70 or Falach 100?

- The [Falach 70](/machines/falach-70-briquette-machine/) is rated 60–80 kg/hour and uses 4.9 kW. Its briquette listing reads “UK Clean Air Strategy compliant (virgin wood only)”. It makes 70 mm briquettes, 40–60 mm long.

- The [Falach 100](/machines/falach-100-briquette-machine/) is rated 90–120 kg/hour and uses 8.2 kW. It has an oil cooler for long runs and an adjustable briquette length (45 mm, set by potentiometer). It compresses at 10 tons per square inch and its briquettes have a density of 900–1,100 kg/m³.

Both need 3-phase 32 amp, have a 0.75 m³ hopper, an auto reverse agitator and automatic switch-out.

## How do I bag the briquettes?

The [Falach Five Bag Carousel Units](/machines/falach-five-bag-carousel-units/) come in a 70 mm variant for the Falach 70 and 100. Briquettes drop into five 20–25 kg bags in turn, with no separate motor. Bags come in boxes of 200 from IWM. The [IWM Six Bag Carousel Unit with Top Loading](/machines/iwm-six-bag-carousel-unit-with-top-loading/) is made to fit most machines and needs no power.

## Thinking of selling wood fuel? Check first

We’ll be careful here, because the rules matter and change. In England, wood fuel sold to households may need to meet Ready to Burn requirements, run by Woodsure. Rules in Scotland, Wales and Northern Ireland differ. Briquettes containing board, MDF or treated timber bring further rules on top. Before you sell, check with the Environment Agency (or SEPA, NRW or NIEA), your local authority and Woodsure. We’re happy to talk through your plans, but the decision isn’t ours to make.

## What makes a good briquette?

Clean, dry, consistent briquettes. Dry wood briquettes typically hold around 4.5–5 kWh of energy per kg. Damp briquettes swell and break up, so moisture control and dry storage matter as much as the press.

## Where does the raw material come from?

Many producers start with their own waste: a sawmill, joinery or timber yard. Others collect clean dry waste from nearby workshops. If you take in other people’s waste, check whether that needs a waste licence or exemption.

**Check the rules before you burn them.** Briquettes made from treated, painted or board materials (MDF, chipboard, laminate) are still waste wood, and burning them may need an environmental permit or a registered exemption. Check with the Environment Agency (or SEPA in Scotland, Natural Resources Wales or NIEA in Northern Ireland) and your local authority. Selling wood fuel to households has its own certification rules (Ready to Burn or Woodsure), so check before offering any. We are happy to talk it through with you, but we can’t give you a ruling for your site.

Not sure which machine fits? [Send us a sample of your waste or come and see a machine running](/book-a-trial/), or [ask IWM](/contact/) on 01636 918280.

### Models that fit

- [Falach 70 Briquette Machine](https://briquette-machines.co.uk/machines/falach-70-briquette-machine.md): 60–80 kg/h
- [Falach 100 Briquette Machine](https://briquette-machines.co.uk/machines/falach-100-briquette-machine.md): 90–120 kg/h
- [Falach Five Bag Carousel Units](https://briquette-machines.co.uk/machines/falach-five-bag-carousel-units.md)
- [IWM Six Bag Carousel Unit with Top Loading](https://briquette-machines.co.uk/machines/iwm-six-bag-carousel-unit-with-top-loading.md)

### Questions and answers

**Which briquette machine is best for making briquettes in volume?**
For volume, the Falach 70 (60–80 kg/hour) or Falach 100 (90–120 kg/hour), paired with a bag carousel.

**Do I need certification to sell wood briquettes?**
Selling wood fuel to households in the UK may fall under Ready to Burn or Woodsure rules. Check with Woodsure, your regulator and your local authority.

**How much electricity does the Falach 100 use per tonne?**
At 8.2 kW and 105 kg/hour (the middle of its range), about 78 kWh per tonne. Real figures vary with material.

**What size briquettes do the larger Falach models make?**
The Falach 70 makes 70 mm briquettes 40–60 mm long. The Falach 100 makes 70 mm briquettes 45 mm long, adjustable.

**Can I collect other businesses' waste to briquette?**
Possibly, but taking in waste may need a waste licence or exemption. Check with your environmental regulator.


## About IWM

> This site is run by IW Machines Ltd (IWM), a woodworking machinery dealer based in Newark, Nottinghamshire. We supply Falach and BrikStar briquette machines, bag carousels and used briquetters, and the same team handles support, servicing and parts.

- URL: https://briquette-machines.co.uk/about/
- Updated: 18 November 2026

## Who runs this site?

briquette-machines.co.uk is the specialist briquetting site of IW Machines Ltd, known as IWM. Our main website, [iwmachines.co.uk](https://www.iwmachines.co.uk/), covers the full range of woodworking machinery we sell. This site goes deeper on one thing: what to do with your wood waste, and which briquette machine suits it.

Ian Brown, our founder and Managing Director, started in the trade in 1973 as a 16-year-old apprentice at Wadkin. He set up IWM in April 2009. The people you speak to here know how a workshop runs and where the waste comes from.

## What we supply

- **Falach briquette presses**, our main range: the [Falach 20](/machines/falach-20-briquette-machine/), [Falach 20XL](/machines/falach-20xl-briquette-machine/), [Falach 30](/machines/falach-30-briquette-machine/), [Falach 35](/machines/falach-35-briquette-machine/), [Falach 50](/machines/falach-50-briquette-machine/), [Falach 50XL](/machines/falach-50xl-briquette-machine/), [Falach 70](/machines/falach-70-briquette-machine/) and [Falach 100](/machines/falach-100-briquette-machine/).

- **BrikStar**: the compact [BrikStar EK 20](/machines/brikstar-ek-20/).

- **Bag carousels**: the [Falach Five Bag Carousel Units](/machines/falach-five-bag-carousel-units/) and the [IWM Six Bag Carousel Unit with Top Loading](/machines/iwm-six-bag-carousel-unit-with-top-loading/).

- **[Used and ex-demo briquetters](/used-briquette-machines/)**, when we have them.

Through the main IWM business we also supply dust extractors, shredders for offcuts and wood waste heaters, so we can look at the whole waste system, not just the press.

## Where we are

We have two units in Newark. Unit 20, Newark Business Park, is our showroom and demonstration area: come and watch a briquette press run, or bring your own waste to try. Unit 29 is our service and refurbishment workshop. We’re open Monday to Friday, 8am to 5pm, and can open at weekends by appointment.

## Support after you buy

We can deliver your machine, install it and train your operators, and finance can be arranged. Support, servicing and parts come from the same team that sold you the machine. You don’t get passed to a call centre.

## Company details

Company |
IW Machines Ltd (IWM) |

Company number |
06872243 |

Address |
Unit 20 Newark Business Park, 3 Brunel Drive, Newark NG24 2EG |

Phone |
01636 918280 |

Email |
[info@iwmachines.co.uk](mailto:info@iwmachines.co.uk) |

VAT number |
971462605 |

Founded |
April 2009 |

Main website |
[www.iwmachines.co.uk](https://www.iwmachines.co.uk/) |

## Talk to us

Tell us what waste you make and roughly how much, and we’ll tell you honestly whether a briquette machine makes sense yet. [Contact us](/contact/) or [book a trial](/book-a-trial/).

### Questions and answers

**Who is behind briquette-machines.co.uk?**
IW Machines Ltd (IWM), company number 06872243, of Unit 20 Newark Business Park, 3 Brunel Drive, Newark NG24 2EG. Phone 01636 918280. Email info@iwmachines.co.uk. Founded in April 2009 by Ian Brown.

**Is this the same company as iwmachines.co.uk?**
Yes. This is IWM's specialist site for briquette machines. The main site covers the full range of woodworking machinery.

**Do you service the machines you sell?**
Yes. Support, servicing and parts come from the same IWM team.

**Do you install and train?**
We can deliver, install and train your operators. On some models, such as the Falach 100, installation and commissioning is charged separately. Ask us for a quote.


